WeEn Semiconductors
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
BTA201-800B,112
vedi dettagli Schede tecniche

BTA201-800B,112

Product Overview

The BTA201-800B,112 belongs to the category of semiconductor devices and is specifically designed for use in power control and switching applications. This product is characterized by its high current capability, low holding current, and compact package. The BTA201-800B,112 is typically packaged in a TO-220AB form factor and is available in quantities suitable for both individual and industrial use.

Specifications

  • Maximum RMS on-state current: 16A
  • Repetitive peak off-state voltage: 800V
  • Gate trigger current: 35mA
  • Holding current: 50mA
  • Package type: TO-220AB

Detailed Pin Configuration

The BTA201-800B,112 features a standard TO-220AB pin configuration with three pins: gate (G), main terminal 1 (MT1), and main terminal 2 (MT2).

Functional Features

  • High current capability
  • Low holding current for improved efficiency
  • Suitable for AC switching applications
  • Compact and robust package design

Advantages and Disadvantages

Advantages - High current handling capacity - Low holding current for reduced power dissipation - Robust and reliable performance

Disadvantages - Sensitive to voltage transients - Limited maximum operating temperature

Working Principles

The BTA201-800B,112 operates based on the principles of thyristor technology, utilizing a gate signal to control the flow of current between its main terminals. When triggered, the device conducts current until the load current falls below the holding current level.

Detailed Application Field Plans

The BTA201-800B,112 is commonly used in various applications such as: - AC motor control - Lighting control - Power supplies - Industrial heating systems

Detailed and Complete Alternative Models

  • BTA208X-600E,127
  • BTA41600B,118
  • BTA41600BRG,127

In conclusion, the BTA201-800B,112 is a versatile semiconductor device suitable for a wide range of power control and switching applications. Its high current capability, compact package, and efficient performance make it an ideal choice for various industrial and consumer electronics applications.

Word count: 286

10 domande e risposte comuni relative all'applicazione di BTA201-800B,112 nelle soluzioni tecniche

  1. What is BTA201-800B,112?

    • BTA201-800B,112 is a specific type of semiconductor device, commonly known as a diode bridge rectifier, used for converting alternating current (AC) to direct current (DC) in various technical solutions.

  2. What are the key specifications of BTA201-800B,112?

    • The BTA201-800B,112 typically has a maximum average forward current of 20A, a repetitive peak reverse voltage of 800V, and a non-repetitive peak reverse voltage of 900V.

  3. How is BTA201-800B,112 commonly used in technical solutions?

    • BTA201-800B,112 is often used in power supply circuits, motor control applications, and other systems requiring AC to DC conversion.

  4. What are the typical operating conditions for BTA201-800B,112?

    • The BTA201-800B,112 is designed to operate within a specified temperature range, usually between -40°C to 125°C, and requires proper heat sinking for efficient operation.

  5. What are the potential failure modes of BTA201-800B,112?

    • Common failure modes include overcurrent conditions, thermal stress, and voltage transients, which can lead to degradation or permanent damage to the device.

  6. How do I select the appropriate BTA201-800B,112 for my application?

    • When selecting a BTA201-800B,112, consider factors such as maximum current requirements, voltage ratings, thermal management, and package type to ensure compatibility with your specific technical solution.

  7. What are the recommended mounting and handling practices for BTA201-800B,112?

    • Proper mounting techniques, including using thermal interface materials and ensuring adequate airflow, are essential for maintaining the reliability and performance of the BTA201-800B,112. Additionally, electrostatic discharge (ESD) precautions should be observed during handling.

  8. Are there any common circuit design considerations when using BTA201-800B,112?

    • Yes, circuit design should account for input voltage variations, load conditions, and protection mechanisms such as fuses and surge suppressors to safeguard the BTA201-800B,112 and the overall system.

  9. Can BTA201-800B,112 be used in high-frequency applications?

    • BTA201-800B,112 is typically not suitable for high-frequency applications due to its inherent limitations in switching speed and dynamic characteristics.

  10. Where can I find detailed application notes and reference designs for BTA201-800B,112?

    • Manufacturers' datasheets, application notes, and online resources from semiconductor companies provide valuable information and reference designs for integrating BTA201-800B,112 into technical solutions.