Vedi le specifiche per i dettagli del prodotto.
SQJ958EP-T1_GE3
Product Overview
- Category: Semiconductor
- Use: Power management
- Characteristics: High efficiency, low power consumption
- Package: TO-263-7L
- Essence: Efficient power control
- Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
- Input Voltage: 4.5V to 60V
- Output Current: 8A
- Switching Frequency: 300kHz
- Operating Temperature: -40°C to 125°C
- Features: Overcurrent protection, thermal shutdown, adjustable soft-start
Detailed Pin Configuration
- VIN (Input voltage)
- GND (Ground)
- EN (Enable)
- FB (Feedback)
- SS (Soft-start)
- PG (Power good)
- VOUT (Output voltage)
Functional Features
- Efficient Power Control: Provides high efficiency power management for various applications.
- Overcurrent Protection: Safeguards the system from excessive current flow.
- Thermal Shutdown: Protects the device from overheating.
Advantages and Disadvantages
- Advantages:
- High efficiency
- Wide input voltage range
- Comprehensive protection features
- Disadvantages:
- Higher cost compared to some alternatives
- Limited output current compared to higher-end models
Working Principles
The SQJ958EP-T1_GE3 operates by regulating the input voltage to provide a stable output voltage with high efficiency. It utilizes internal circuitry to monitor and protect against overcurrent and thermal issues, ensuring reliable power management.
Detailed Application Field Plans
This product is suitable for a wide range of applications including: - Industrial automation - Automotive electronics - Renewable energy systems - Telecommunications equipment
Detailed and Complete Alternative Models
- Alternative Model 1: SQJ951EP-T1_GE3
- Similar specifications and package
- Lower output current
- Alternative Model 2: SQJ961EP-T1_GE3
- Higher output current
- Different package (TO-220-7L)
Note: The alternative models listed are for reference and may vary based on specific application requirements.
This comprehensive entry provides detailed information about the SQJ958EP-T1_GE3, covering its specifications, features, advantages, and application fields. Additionally, alternative models are suggested for comparison and consideration.
10 domande e risposte comuni relative all'applicazione di SQJ958EP-T1_GE3 nelle soluzioni tecniche
Sure, here are 10 common questions and answers related to the application of SQJ958EP-T1_GE3 in technical solutions:
What is the operating voltage range of SQJ958EP-T1_GE3?
- The operating voltage range of SQJ958EP-T1_GE3 is typically from 4.5V to 60V.
What is the maximum continuous drain current of SQJ958EP-T1_GE3?
- The maximum continuous drain current of SQJ958EP-T1_GE3 is typically 8A.
What type of package does SQJ958EP-T1_GE3 come in?
- SQJ958EP-T1_GE3 comes in a PowerPAK SO-8 package.
What is the typical on-resistance of SQJ958EP-T1_GE3?
- The typical on-resistance of SQJ958EP-T1_GE3 is 18mΩ at VGS = 10V.
Can SQJ958EP-T1_GE3 be used in automotive applications?
- Yes, SQJ958EP-T1_GE3 is suitable for use in automotive applications.
What is the typical gate charge of SQJ958EP-T1_GE3?
- The typical gate charge of SQJ958EP-T1_GE3 is 15nC.
Is SQJ958EP-T1_GE3 RoHS compliant?
- Yes, SQJ958EP-T1_GE3 is RoHS compliant.
What is the typical thermal resistance of SQJ958EP-T1_GE3?
- The typical thermal resistance of SQJ958EP-T1_GE3 is 40°C/W.
Can SQJ958EP-T1_GE3 be used in power management applications?
- Yes, SQJ958EP-T1_GE3 is suitable for use in power management applications.
What is the maximum junction temperature of SQJ958EP-T1_GE3?
- The maximum junction temperature of SQJ958EP-T1_GE3 is 175°C.
These questions and answers should provide a good overview of the key technical aspects of SQJ958EP-T1_GE3 for various applications.