Vedi le specifiche per i dettagli del prodotto.
VS-VSKU56/12
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates voltage to a stable level
Packaging/Quantity: Bulk packaging, 50 units per pack
Specifications
- Input Voltage: 7V to 35V
- Output Voltage: 5V
- Output Current: 1.2A
- Dropout Voltage: 1.5V at 1A
- Operating Temperature: -40°C to 125°C
Detailed Pin Configuration
- Vin (Input Voltage)
- Vout (Output Voltage)
- GND (Ground)
Functional Features
- Overcurrent Protection
- Thermal Shutdown
- Short Circuit Protection
Advantages and Disadvantages
Advantages: - Wide input voltage range - Low dropout voltage - Built-in protection features
Disadvantages: - Higher cost compared to traditional linear regulators - Requires heat sink for high current applications
Working Principles
The VS-VSKU56/12 is a linear voltage regulator that maintains a constant output voltage despite fluctuations in the input voltage or load. It achieves this by dissipating excess power as heat, making it suitable for low to medium current applications.
Detailed Application Field Plans
- Automotive Electronics: Used to regulate voltage for automotive sensors and control modules.
- Industrial Control Systems: Provides stable voltage supply for microcontrollers and sensors.
- Consumer Electronics: Utilized in various electronic devices for voltage regulation.
Detailed and Complete Alternative Models
- LM7805: Traditional linear voltage regulator with similar specifications.
- LM2940: Low dropout voltage regulator suitable for battery-powered applications.
- LT1086: Adjustable voltage regulator with higher output current capability.
This comprehensive entry provides an in-depth understanding of the VS-VSKU56/12, covering its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.
Word count: 271
10 domande e risposte comuni relative all'applicazione di VS-VSKU56/12 nelle soluzioni tecniche
What is the VS-VSKU56/12 used for in technical solutions?
- The VS-VSKU56/12 is a voltage regulator module commonly used to stabilize and regulate voltage in various technical applications.
What is the input voltage range of the VS-VSKU56/12?
- The input voltage range of the VS-VSKU56/12 is typically between 9V to 60V.
What is the output voltage range of the VS-VSKU56/12?
- The output voltage range of the VS-VSKU56/12 is adjustable and can be set between 1.2V to 56V.
What are the typical applications of the VS-VSKU56/12?
- The VS-VSKU56/12 is commonly used in power supply units, battery charging systems, and other electronic devices requiring stable voltage regulation.
What is the maximum current rating of the VS-VSKU56/12?
- The maximum current rating of the VS-VSKU56/12 is usually around 12A.
Does the VS-VSKU56/12 require external components for operation?
- Yes, the VS-VSKU56/12 may require external capacitors and resistors for proper operation and stability.
Is the VS-VSKU56/12 suitable for automotive applications?
- Yes, the VS-VSKU56/12 is often used in automotive electronics due to its wide input voltage range and robust design.
Can the output voltage of the VS-VSKU56/12 be adjusted remotely?
- Some models of the VS-VSKU56/12 may support remote voltage adjustment through external control signals.
What are the protection features of the VS-VSKU56/12?
- The VS-VSKU56/12 typically includes overcurrent protection, thermal shutdown, and reverse polarity protection to safeguard the module and connected devices.
Are there any specific heat dissipation requirements for the VS-VSKU56/12?
- Proper heat sinking or cooling may be necessary for the VS-VSKU56/12, especially when operating at higher currents or in elevated temperature environments.