Vishay Semiconductor Diodes Division
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
VS-ST730C16L1
vedi dettagli Schede tecniche

VS-ST730C16L1

Product Overview

Category: Semiconductor Devices
Use: Power supply control
Characteristics: High efficiency, low power consumption
Package: TO-220F-5L
Essence: MOSFET and Schottky diode integrated module
Packaging/Quantity: Single unit

Specifications

  • Voltage Rating: 600V
  • Current Rating: 30A
  • RDS(ON): 0.16Ω
  • Diode Forward Voltage: 1.35V
  • Operating Temperature: -55°C to 150°C

Detailed Pin Configuration

  1. Gate
  2. Drain (MOSFET)
  3. Source (MOSFET)
  4. Anode (Diode)
  5. Cathode (Diode)

Functional Features

  • Integrated MOSFET and Schottky diode for simplified circuit design
  • High switching speed for improved efficiency
  • Low reverse recovery current for reduced power loss
  • Enhanced thermal performance for reliability in harsh environments

Advantages and Disadvantages

Advantages: - Simplified circuit design - Improved efficiency - Reduced power loss

Disadvantages: - Higher cost compared to discrete components - Limited flexibility in circuit customization

Working Principles

The VS-ST730C16L1 integrates a MOSFET and Schottky diode to provide efficient power supply control. When a voltage is applied to the gate terminal, the MOSFET allows current to flow from the drain to the source, while the Schottky diode provides a low forward voltage drop during reverse recovery.

Detailed Application Field Plans

The VS-ST730C16L1 is suitable for various power supply applications, including: - Switched-mode power supplies - Motor drives - Inverters - Uninterruptible power supplies

Detailed and Complete Alternative Models

  1. VS-ST730C14L1
    • Similar specifications with lower current rating
  2. VS-ST730C20L1
    • Similar specifications with higher current rating
  3. VS-ST730C16L2
    • Dual MOSFET and Schottky diode module for parallel operation

In conclusion, the VS-ST730C16L1 offers a compact and efficient solution for power supply control, making it suitable for a wide range of applications in various industries.

Word count: 298

10 domande e risposte comuni relative all'applicazione di VS-ST730C16L1 nelle soluzioni tecniche

  1. What is the VS-ST730C16L1?

    • The VS-ST730C16L1 is a high-performance solid-state relay (SSR) designed for use in technical solutions requiring precise and reliable switching of AC loads.

  2. What is the maximum load current and voltage rating of the VS-ST730C16L1?

    • The VS-ST730C16L1 has a maximum load current rating of 30A and a maximum load voltage rating of 480VAC, making it suitable for a wide range of applications.

  3. What type of control input does the VS-ST730C16L1 support?

    • The VS-ST730C16L1 supports both DC and AC control input, allowing for flexible integration into various control systems.

  4. What are the typical applications of the VS-ST730C16L1?

    • Typical applications of the VS-ST730C16L1 include industrial heating systems, motor controls, lighting controls, and other AC load switching applications.

  5. Does the VS-ST730C16L1 offer protection features for the connected load?

    • Yes, the VS-ST730C16L1 incorporates built-in snubber circuits to protect the connected load from voltage transients and EMI.

  6. Is the VS-ST730C16L1 suitable for high-frequency switching applications?

    • Yes, the VS-ST730C16L1 is designed to handle high-frequency switching, making it suitable for applications requiring rapid on/off cycles.

  7. What is the operating temperature range of the VS-ST730C16L1?

    • The VS-ST730C16L1 is designed to operate within a temperature range of -40°C to 80°C, ensuring reliable performance in harsh environments.

  8. Can the VS-ST730C16L1 be used in three-phase systems?

    • Yes, the VS-ST730C16L1 can be used in three-phase systems by appropriately configuring multiple units for each phase.

  9. Does the VS-ST730C16L1 support zero-crossing switching?

    • Yes, the VS-ST730C16L1 supports zero-crossing switching, which helps minimize electrical noise and interference.

  10. What are the key advantages of using the VS-ST730C16L1 in technical solutions?

    • The key advantages of the VS-ST730C16L1 include its high reliability, long lifespan, fast switching speed, and compatibility with a wide range of control systems.