Vedi le specifiche per i dettagli del prodotto.
VLZ6V2-GS08
Introduction
The VLZ6V2-GS08 belongs to the category of voltage regulators and is designed for use in various electronic applications. This device offers unique characteristics, packaging, and quantity options that make it suitable for a wide range of voltage regulation needs.
Basic Information Overview
- Category: Voltage Regulator
- Use: To regulate voltage in electronic circuits
- Characteristics: High precision, low dropout voltage, thermal shutdown protection
- Package: SOT-23-5
- Essence: Ensures stable voltage output
- Packaging/Quantity: Available in tape and reel packaging, quantity options vary
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage Range: 1.2V to 5.5V
- Dropout Voltage: 200mV at 150mA
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- GND
- VOUT
- NC
- FB
- VIN
Functional Features
- High accuracy and stability
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit current limit
- Reverse polarity protection
Advantages and Disadvantages
Advantages
- Precise voltage regulation
- Wide input voltage range
- Thermal protection for enhanced safety
Disadvantages
- Limited maximum output current
- Sensitive to external noise
Working Principles
The VLZ6V2-GS08 operates by comparing the feedback voltage with a reference voltage to adjust the output voltage. It utilizes a feedback loop to maintain a stable output voltage despite variations in the input voltage and load conditions.
Detailed Application Field Plans
This voltage regulator is suitable for various applications including: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Sensor modules
Detailed and Complete Alternative Models
- LM1117
- MCP1700
- XC6206
In conclusion, the VLZ6V2-GS08 voltage regulator offers precise and stable voltage regulation for a wide range of electronic applications. Its compact package and essential features make it an ideal choice for modern electronic designs.
(Word count: 320)
10 domande e risposte comuni relative all'applicazione di VLZ6V2-GS08 nelle soluzioni tecniche
What is the VLZ6V2-GS08 and what is its application?
- The VLZ6V2-GS08 is a voltage level shifter designed for use in various technical solutions to shift voltage levels between different components or subsystems.
What is the input voltage range of the VLZ6V2-GS08?
- The input voltage range of the VLZ6V2-GS08 is typically from 0V to 5.5V.
What is the output voltage range of the VLZ6V2-GS08?
- The output voltage range of the VLZ6V2-GS08 is typically from 0V to 5.5V.
What are the typical applications of the VLZ6V2-GS08?
- The VLZ6V2-GS08 is commonly used in applications such as level shifting between different logic families, interfacing between microcontrollers and sensors, and communication interfaces like I2C, SPI, and UART.
Can the VLZ6V2-GS08 handle bidirectional level shifting?
- Yes, the VLZ6V2-GS08 can handle bidirectional level shifting, making it suitable for applications where data needs to be transferred in both directions.
What is the maximum data rate supported by the VLZ6V2-GS08?
- The VLZ6V2-GS08 supports high-speed data rates up to 100MHz, making it suitable for fast communication interfaces.
Is the VLZ6V2-GS08 compatible with both 3.3V and 5V systems?
- Yes, the VLZ6V2-GS08 is compatible with both 3.3V and 5V systems, providing flexibility in system design.
Does the VLZ6V2-GS08 require external components for operation?
- The VLZ6V2-GS08 typically requires minimal external components for operation, simplifying the design process.
What is the power consumption of the VLZ6V2-GS08?
- The power consumption of the VLZ6V2-GS08 is typically low, making it suitable for power-sensitive applications.
Are there any specific layout considerations when using the VLZ6V2-GS08 in a PCB design?
- It is recommended to follow the layout guidelines provided in the datasheet to ensure optimal performance and signal integrity when using the VLZ6V2-GS08 in a PCB design.