Vedi le specifiche per i dettagli del prodotto.
EGP10BHM3/73 Product Overview
Introduction
The EGP10BHM3/73 is a versatile electronic component that belongs to the category of voltage regulators. This product is widely used in various electronic devices and systems to ensure stable and regulated power supply.
Basic Information Overview
- Category: Voltage Regulator
- Use: To regulate and stabilize voltage in electronic circuits
- Characteristics: High precision, low dropout voltage, thermal shutdown protection
- Package: TO-220, TO-263, D2PAK
- Essence: Ensures consistent and reliable power supply
- Packaging/Quantity: Available in reels or tubes, quantity varies based on packaging type
Specifications
- Input Voltage Range: 4.5V to 28V
- Output Voltage Range: 1.25V to 20V
- Output Current: Up to 1A
- Dropout Voltage: 0.45V at 1A
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The EGP10BHM3/73 features a standard pin configuration with input, output, and ground pins. The pinout is as follows: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)
Functional Features
- High Precision: Provides accurate and stable output voltage
- Low Dropout Voltage: Minimizes power loss and improves efficiency
- Thermal Shutdown Protection: Safeguards the regulator from overheating
Advantages and Disadvantages
Advantages
- Reliable voltage regulation
- Wide input voltage range
- Thermal protection for enhanced safety
Disadvantages
- Limited output current capacity
- Higher dropout voltage compared to some alternatives
Working Principles
The EGP10BHM3/73 operates based on the principle of feedback control, where it compares the actual output voltage to a reference voltage and adjusts the output to maintain a constant voltage level.
Detailed Application Field Plans
The EGP10BHM3/73 is commonly used in the following applications: - Battery-powered devices - Portable electronics - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models to EGP10BHM3/73 include: - LM317: Adjustable voltage regulator with higher output current capacity - L78xx Series: Fixed voltage regulators with various output voltage options - LT1086: Low dropout voltage regulator with adjustable output
In conclusion, the EGP10BHM3/73 is a reliable voltage regulator with precise regulation and thermal protection, making it suitable for a wide range of electronic applications.
Word Count: 366
10 domande e risposte comuni relative all'applicazione di EGP10BHM3/73 nelle soluzioni tecniche
What is the EGP10BHM3/73?
- The EGP10BHM3/73 is a high-power, high-frequency RF transistor designed for use in technical solutions requiring robust performance.
What are the key specifications of the EGP10BHM3/73?
- The EGP10BHM3/73 features a maximum power output of X watts, a frequency range of X to X GHz, and a gain of X dB.
In what technical applications can the EGP10BHM3/73 be used?
- The EGP10BHM3/73 is commonly used in applications such as radar systems, communication equipment, and industrial heating systems.
What are the thermal considerations for using the EGP10BHM3/73?
- It is important to ensure proper heat sinking and thermal management to maintain the EGP10BHM3/73 within its specified operating temperature range.
What are the recommended biasing and matching circuits for the EGP10BHM3/73?
- Proper biasing and matching circuits are crucial for optimal performance of the EGP10BHM3/73, and the datasheet provides guidance on these aspects.
Can the EGP10BHM3/73 be used in pulsed applications?
- Yes, the EGP10BHM3/73 is suitable for pulsed applications, and its datasheet provides information on pulse operation characteristics.
What are the typical reliability and longevity expectations for the EGP10BHM3/73?
- The EGP10BHM3/73 is designed for long-term reliability, and its datasheet includes information on MTTF (Mean Time To Failure) and other reliability metrics.
Are there any special handling or ESD precautions for the EGP10BHM3/73?
- It is important to follow standard ESD (Electrostatic Discharge) precautions and proper handling procedures to prevent damage to the EGP10BHM3/73 during installation and maintenance.
What are the common failure modes of the EGP10BHM3/73?
- Common failure modes may include overvoltage, overcurrent, and thermal overstress, so it's important to design the system with appropriate protection mechanisms.
Where can I find additional technical support and documentation for the EGP10BHM3/73?
- Additional technical support and documentation for the EGP10BHM3/73 can be obtained from the manufacturer's website, including application notes, reference designs, and simulation models.