L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC61GN3002HR-G

XC61GN3002HR-G

Product Overview

Category

XC61GN3002HR-G belongs to the category of electronic components.

Use

It is commonly used in various electronic devices and circuits.

Characteristics

  • Small size
  • High precision
  • Low power consumption
  • Wide operating voltage range

Package

XC61GN3002HR-G is available in a compact surface mount package.

Essence

The essence of XC61GN3002HR-G lies in its ability to provide accurate voltage regulation in electronic systems.

Packaging/Quantity

XC61GN3002HR-G is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 1.8V - 6.0V
  • Output Voltage: 3.0V
  • Output Current: 50mA
  • Dropout Voltage: 0.1V (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC61GN3002HR-G has three pins:

  1. VIN: Input voltage pin
  2. VOUT: Output voltage pin
  3. GND: Ground pin

Functional Features

  • Voltage regulation: XC61GN3002HR-G ensures a stable output voltage despite variations in input voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The device consumes minimal current when no load is connected.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of a fault.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small electronic devices.
  • High precision ensures accurate voltage regulation.
  • Low power consumption prolongs battery life in portable devices.
  • Wide operating voltage range makes it versatile for various applications.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC61GN3002HR-G utilizes a voltage reference and error amplifier to compare the output voltage with a reference voltage. It adjusts the pass transistor's resistance to maintain a stable output voltage, compensating for any input voltage fluctuations.

Detailed Application Field Plans

XC61GN3002HR-G finds applications in various electronic systems, including but not limited to: 1. Mobile phones and smartphones 2. Portable media players 3. Digital cameras 4. Wearable devices 5. Battery-powered IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC61GN3002HR-G are: 1. XC61CN3002MR-G 2. XC61DN3002NR-G 3. XC61EN3002LR-G 4. XC61FN3002PR-G

These models offer similar characteristics and specifications, providing flexibility in design choices.

In conclusion, XC61GN3002HR-G is a compact and precise voltage regulator used in various electronic devices. Its low power consumption and wide operating voltage range make it suitable for a wide range of applications. However, its limited output current and dropout voltage should be considered when selecting the appropriate model for specific requirements.

10 domande e risposte comuni relative all'applicazione di XC61GN3002HR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC61GN3002HR-G in technical solutions:

  1. Question: What is XC61GN3002HR-G?
    Answer: XC61GN3002HR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for detecting and monitoring voltage levels in various electronic applications.

  2. Question: What is the operating voltage range of XC61GN3002HR-G?
    Answer: The operating voltage range of XC61GN3002HR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC61GN3002HR-G work?
    Answer: XC61GN3002HR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage exceeds the reference voltage, the output of the IC changes state, indicating a voltage detection event.

  4. Question: What is the output configuration of XC61GN3002HR-G?
    Answer: XC61GN3002HR-G has an open-drain output configuration, which means that it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.

  5. Question: What is the typical quiescent current consumption of XC61GN3002HR-G?
    Answer: The typical quiescent current consumption of XC61GN3002HR-G is very low, usually around 1.0µA.

  6. Question: Can XC61GN3002HR-G be used in battery-powered applications?
    Answer: Yes, XC61GN3002HR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  7. Question: What is the hysteresis voltage of XC61GN3002HR-G?
    Answer: The hysteresis voltage of XC61GN3002HR-G is typically 0.1V, which provides a stable and reliable voltage detection threshold.

  8. Question: Can XC61GN3002HR-G be used for overvoltage protection?
    Answer: Yes, XC61GN3002HR-G can be used for overvoltage protection by setting the reference voltage to the desired threshold level.

  9. Question: Is XC61GN3002HR-G suitable for automotive applications?
    Answer: Yes, XC61GN3002HR-G is suitable for automotive applications as it meets the necessary requirements for temperature range, reliability, and low power consumption.

  10. Question: What are some typical applications of XC61GN3002HR-G?
    Answer: XC61GN3002HR-G can be used in various applications such as battery-powered devices, power management systems, consumer electronics, industrial equipment, and automotive electronics for voltage monitoring, power supply control, and system protection purposes.

Please note that the answers provided here are general and may vary depending on specific application requirements.