L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6124F716MR-G

XC6124F716MR-G

Product Overview

Category

XC6124F716MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Small size and low profile package
  • Low dropout voltage
  • High output voltage accuracy
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124F716MR-G is available in a small SOT-23-5 package.

Essence

The essence of XC6124F716MR-G lies in its ability to regulate voltage efficiently and accurately in various electronic applications.

Packaging/Quantity

XC6124F716MR-G is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Output Current: 150mA (maximum)

Detailed Pin Configuration

XC6124F716MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection
  5. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient regulation even with small input-output voltage differentials.
  • High output voltage accuracy guarantees precise voltage regulation.
  • Overcurrent protection safeguards the device and connected circuitry from excessive current flow.
  • Thermal shutdown protection prevents overheating and potential damage to the regulator.

Advantages and Disadvantages

Advantages

  • Small size and low profile package make it suitable for space-constrained applications.
  • Low dropout voltage minimizes power dissipation and improves efficiency.
  • High output voltage accuracy ensures reliable performance in various electronic systems.

Disadvantages

  • Limited output current capacity may restrict its use in high-power applications.
  • Input voltage range is relatively narrow compared to some other voltage regulators.

Working Principles

XC6124F716MR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to maintain a stable output voltage regardless of input voltage variations. The internal circuitry adjusts the pass transistor to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6124F716MR-G finds applications in various electronic devices and systems, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124F716MR-G are: - LM1117-3.3V: A popular 3.3V voltage regulator with similar characteristics and package. - MCP1700-3302E/TO: Another 3.3V voltage regulator with low dropout voltage and small package. - LD1117S33TR: A 3.3V voltage regulator with thermal shutdown protection and low quiescent current.

These alternative models provide similar functionality and can be used as substitutes depending on specific requirements and availability.

Word count: 450 words

10 domande e risposte comuni relative all'applicazione di XC6124F716MR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6124F716MR-G in technical solutions:

  1. Question: What is XC6124F716MR-G?
    - Answer: XC6124F716MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124F716MR-G?
    - Answer: The operating voltage range of XC6124F716MR-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6124F716MR-G?
    - Answer: XC6124F716MR-G has an open-drain output type, which means it can be connected to other devices or circuits with different voltage levels.

  4. Question: What is the typical quiescent current consumption of XC6124F716MR-G?
    - Answer: The typical quiescent current consumption of XC6124F716MR-G is very low, typically around 1.0µA.

  5. Question: Can XC6124F716MR-G be used for overvoltage detection?
    - Answer: No, XC6124F716MR-G is specifically designed for undervoltage detection. It triggers an output signal when the monitored voltage falls below a certain threshold.

  6. Question: What is the accuracy of the undervoltage detection threshold in XC6124F716MR-G?
    - Answer: The accuracy of the undervoltage detection threshold in XC6124F716MR-G is typically ±1.5%.

  7. Question: Does XC6124F716MR-G have built-in hysteresis?
    - Answer: Yes, XC6124F716MR-G has built-in hysteresis to prevent oscillation caused by voltage fluctuations near the detection threshold.

  8. Question: Can XC6124F716MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124F716MR-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

  9. Question: What is the package type of XC6124F716MR-G?
    - Answer: XC6124F716MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Question: Are there any additional features or protections in XC6124F716MR-G?
    - Answer: Yes, XC6124F716MR-G includes features like power-on reset delay and thermal shutdown protection to enhance system reliability and stability.

Please note that these answers are based on general information about XC6124F716MR-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.