Torex Semiconductor Ltd
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6124C443ER-G
vedi dettagli Schede tecniche

XC6124C443ER-G

Product Overview

Category

XC6124C443ER-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6124C443ER-G comes in a small surface-mount package.

Essence

The essence of XC6124C443ER-G is to provide reliable voltage regulation for electronic devices.

Packaging/Quantity

XC6124C443ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.43V ± 1%
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (at 100mA)
  • Quiescent Current: 30µA (typical)

Detailed Pin Configuration

XC6124C443ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation within a specified range
  • Low dropout voltage for efficient operation
  • Low quiescent current for power-saving applications
  • Short-circuit protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices
  • Efficient voltage regulation ensures stable performance of connected components
  • Low power consumption helps prolong battery life in portable devices

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Dropout voltage may affect performance in low-input voltage scenarios

Working Principles

XC6124C443ER-G utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6124C443ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C443ER-G are: - LM317 - LT1083 - LM7805 - LM1117

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6124C443ER-G is a voltage regulator that provides reliable voltage regulation for electronic devices. Its compact size, low power consumption, and efficient performance make it suitable for a wide range of applications. However, its limited maximum output current and dropout voltage should be taken into consideration when selecting the appropriate model for high-power or low-input voltage scenarios.

10 domande e risposte comuni relative all'applicazione di XC6124C443ER-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6124C443ER-G in technical solutions:

  1. Q: What is XC6124C443ER-G? A: XC6124C443ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6124C443ER-G? A: The operating voltage range of XC6124C443ER-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6124C443ER-G work? A: XC6124C443ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal.

  4. Q: What is the output type of XC6124C443ER-G? A: XC6124C443ER-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.

  5. Q: What is the typical quiescent current consumption of XC6124C443ER-G? A: The typical quiescent current consumption of XC6124C443ER-G is very low, usually around 1.0µA.

  6. Q: Can XC6124C443ER-G be used for undervoltage and overvoltage detection? A: Yes, XC6124C443ER-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.

  7. Q: What is the accuracy of XC6124C443ER-G? A: The accuracy of XC6124C443ER-G is typically ±1.0% of the detection voltage.

  8. Q: Can XC6124C443ER-G be used in automotive applications? A: Yes, XC6124C443ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Q: What is the temperature range of XC6124C443ER-G? A: The temperature range of XC6124C443ER-G is typically between -40°C and +85°C.

  10. Q: How can XC6124C443ER-G be soldered onto a PCB? A: XC6124C443ER-G is available in various package options, such as SOT-25 and USP-6B. It can be soldered using standard surface mount technology (SMT) techniques.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.