Torex Semiconductor Ltd
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6124A442MR-G
vedi dettagli Schede tecniche

XC6124A442MR-G

Product Overview

Category

XC6124A442MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • High precision voltage regulation
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124A442MR-G is available in a small surface mount package.

Essence

The essence of XC6124A442MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

XC6124A442MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Output Current: 150mA (max)
  • Dropout Voltage: 200mV (typ)
  • Quiescent Current: 30μA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A442MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6124A442MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It provides protection against excessive current flow, preventing damage to the device.
  • Thermal shutdown protection: In case of overheating, the regulator shuts down to prevent any potential damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • High precision voltage regulation ensures reliable performance.
  • Low power consumption helps in energy-efficient designs.
  • Wide input voltage range provides flexibility in different applications.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage can cause a slight voltage drop across the regulator.

Working Principles

XC6124A442MR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The regulator continuously monitors the input and output voltages, making necessary adjustments to ensure a constant output voltage despite changes in the input voltage or load conditions.

Detailed Application Field Plans

XC6124A442MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124A442MR-G are: - LM1117-3.3: A low dropout voltage regulator with an output voltage of 3.3V. - LT1763: A high-performance, low dropout linear regulator with adjustable output voltage. - TPS7A4700: An ultra-low noise, high PSRR (Power Supply Rejection Ratio) LDO voltage regulator.

These alternative models can be considered based on specific requirements and design constraints.

Word count: 409 words

10 domande e risposte comuni relative all'applicazione di XC6124A442MR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6124A442MR-G in technical solutions:

  1. Question: What is XC6124A442MR-G?
    Answer: XC6124A442MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6124A442MR-G?
    Answer: The operating voltage range of XC6124A442MR-G is typically between 0.8V and 6.0V.

  3. Question: What is the purpose of using XC6124A442MR-G in a technical solution?
    Answer: XC6124A442MR-G is commonly used to monitor the power supply voltage in various electronic devices and systems, ensuring proper operation and preventing damage due to voltage fluctuations.

  4. Question: Can XC6124A442MR-G be used in battery-powered applications?
    Answer: Yes, XC6124A442MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Question: How does XC6124A442MR-G provide a reset signal?
    Answer: XC6124A442MR-G has an open-drain output that pulls the reset pin low when the monitored voltage drops below the specified threshold.

  6. Question: What is the typical reset voltage threshold of XC6124A442MR-G?
    Answer: The typical reset voltage threshold of XC6124A442MR-G is 4.42V.

  7. Question: Is XC6124A442MR-G capable of providing a delayed reset signal?
    Answer: No, XC6124A442MR-G does not have a built-in delay function. It provides an immediate reset signal when the voltage drops below the threshold.

  8. Question: Can XC6124A442MR-G be used in automotive applications?
    Answer: Yes, XC6124A442MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: What is the package type of XC6124A442MR-G?
    Answer: XC6124A442MR-G is available in a SOT-25 package, which is a small surface-mount package.

  10. Question: Are there any additional features or protections provided by XC6124A442MR-G?
    Answer: Yes, XC6124A442MR-G includes features like hysteresis to prevent oscillation near the threshold voltage and overcurrent protection to safeguard against excessive current flow.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.