Vedi le specifiche per i dettagli del prodotto.
XC6123E726MR-G
Product Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Regulator
- Characteristics: High precision, low dropout voltage, small package size
- Package: SOT-23-5
- Essence: This IC is designed to regulate voltage in electronic circuits, ensuring a stable output voltage regardless of input variations.
- Packaging/Quantity: Available in tape and reel packaging, with 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.0V
- Dropout Voltage: 200mV @ 100mA
- Output Current: 100mA
- Quiescent Current: 30µA
- Line Regulation: ±0.05%
- Load Regulation: ±0.1%
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The XC6123E726MR-G has a total of 5 pins:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin (active high)
- FB: Feedback pin for setting the output voltage
- VOUT: Output voltage pin
Functional Features
- High Precision: The XC6123E726MR-G provides accurate voltage regulation, ensuring a stable output even with varying input voltages.
- Low Dropout Voltage: With a dropout voltage as low as 200mV, this IC minimizes power loss and improves efficiency.
- Small Package Size: The SOT-23-5 package allows for compact designs, making it suitable for space-constrained applications.
Advantages and Disadvantages
Advantages: - High precision voltage regulation - Low dropout voltage - Small package size - Low quiescent current
Disadvantages: - Limited output current (100mA) - Restricted input voltage range (2.5V - 6.0V)
Working Principles
The XC6123E726MR-G is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to regulate the output voltage within the specified range. The enable pin allows for easy on/off control of the regulator.
Detailed Application Field Plans
The XC6123E726MR-G can be used in various electronic devices and applications, including but not limited to:
- Battery-powered devices: Provides stable voltage supply for portable electronics such as smartphones, tablets, and wearable devices.
- IoT devices: Ensures consistent power delivery for sensors, microcontrollers, and communication modules in Internet of Things applications.
- Automotive electronics: Suitable for automotive systems requiring precise voltage regulation, such as infotainment systems, navigation units, and engine control units.
- Industrial equipment: Used in industrial automation, control systems, and instrumentation where reliable voltage regulation is crucial.
Detailed and Complete Alternative Models
- XC6123E725MR-G: Similar to XC6123E726MR-G, but with a lower output voltage range (1.2V - 4.5V).
- XC6123E727MR-G: Similar to XC6123E726MR-G, but with a higher output voltage range (1.2V - 5.5V).
- XC6123E728MR-G: Similar to XC6123E726MR-G, but with a higher output current capability (200mA).
These alternative models provide flexibility in choosing the appropriate voltage regulator based on specific application requirements.
Word count: 409 words
10 domande e risposte comuni relative all'applicazione di XC6123E726MR-G nelle soluzioni tecniche
Sure! Here are 10 common questions and answers related to the application of XC6123E726MR-G in technical solutions:
Q: What is XC6123E726MR-G? A: XC6123E726MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6123E726MR-G? A: The operating voltage range of XC6123E726MR-G is typically between 0.8V and 6.0V.
Q: How does XC6123E726MR-G work? A: XC6123E726MR-G works by continuously monitoring the input voltage and comparing it to a preset threshold. When the input voltage falls below or exceeds the threshold, the output of the IC changes state, indicating a power supply fault.
Q: What is the output configuration of XC6123E726MR-G? A: XC6123E726MR-G has an open-drain output configuration, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.
Q: Can XC6123E726MR-G be used in battery-powered applications? A: Yes, XC6123E726MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.
Q: Is XC6123E726MR-G suitable for automotive applications? A: Yes, XC6123E726MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards and has a wide operating temperature range of -40°C to +105°C.
Q: Can XC6123E726MR-G be used for overvoltage protection? A: Yes, XC6123E726MR-G can be used for overvoltage protection by setting the threshold voltage slightly above the maximum allowable voltage. When the input voltage exceeds this threshold, the output will change state, indicating an overvoltage condition.
Q: What is the response time of XC6123E726MR-G? A: The response time of XC6123E726MR-G is typically 200µs, which means it can quickly detect and respond to changes in the input voltage.
Q: Can XC6123E726MR-G be used in industrial control systems? A: Yes, XC6123E726MR-G can be used in industrial control systems as it has a wide supply voltage range and can operate reliably in harsh environments.
Q: Are there any application notes or reference designs available for XC6123E726MR-G? A: Yes, Torex Semiconductor provides application notes and reference designs for XC6123E726MR-G on their website, which can help engineers in implementing the IC in their technical solutions.
Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.