Vedi le specifiche per i dettagli del prodotto.
XC6123E426MR-G
Product Overview
Category
XC6123E426MR-G belongs to the category of electronic components.
Use
It is commonly used in various electronic devices and circuits for voltage regulation purposes.
Characteristics
- Voltage regulation capabilities
- Small form factor
- Low power consumption
- High precision
- Wide input voltage range
Package
XC6123E426MR-G is available in a compact surface mount package.
Essence
The essence of XC6123E426MR-G lies in its ability to regulate voltage efficiently and accurately.
Packaging/Quantity
XC6123E426MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.26V
- Output Current: Up to 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123E426MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- NC: No connection pin
Functional Features
- Voltage regulation: XC6123E426MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to prevent damage to the device and connected circuitry.
- Thermal shutdown: In case of excessive temperature, the device shuts down to avoid overheating.
Advantages and Disadvantages
Advantages
- Compact size allows for easy integration into space-constrained designs.
- High precision voltage regulation ensures reliable performance.
- Low power consumption contributes to energy efficiency.
- Wide input voltage range provides flexibility in various applications.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Dropout voltage may affect performance in low input voltage scenarios.
Working Principles
XC6123E426MR-G utilizes a voltage reference, error amplifier, and pass transistor to regulate the output voltage. The error amplifier compares the feedback voltage with the reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
XC6123E426MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123E426MR-G are: - XC6123E425MR-G: Similar specifications, but with a slightly lower output voltage of 4.25V. - XC6123E427MR-G: Similar specifications, but with a slightly higher output voltage of 4.27V. - XC6123E428MR-G: Similar specifications, but with a slightly higher output voltage of 4.28V.
Note: This is not an exhaustive list, and there may be other alternative models available in the market.
Word count: 443 words
10 domande e risposte comuni relative all'applicazione di XC6123E426MR-G nelle soluzioni tecniche
Sure! Here are 10 common questions and answers related to the application of XC6123E426MR-G in technical solutions:
Q: What is XC6123E426MR-G? A: XC6123E426MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6123E426MR-G? A: The operating voltage range of XC6123E426MR-G is from 0.8V to 6.0V.
Q: How does XC6123E426MR-G work? A: XC6123E426MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or rises above the reference voltage, it triggers an output signal.
Q: What is the output type of XC6123E426MR-G? A: XC6123E426MR-G has an open-drain output type, which means it can sink current but cannot source current.
Q: What is the typical quiescent current consumption of XC6123E426MR-G? A: The typical quiescent current consumption of XC6123E426MR-G is around 1.0µA.
Q: Can XC6123E426MR-G be used for overvoltage protection? A: No, XC6123E426MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.
Q: What is the accuracy of the voltage detection threshold in XC6123E426MR-G? A: The accuracy of the voltage detection threshold in XC6123E426MR-G is typically ±1.5%.
Q: Can XC6123E426MR-G be used in automotive applications? A: Yes, XC6123E426MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: Does XC6123E426MR-G have a built-in hysteresis function? A: Yes, XC6123E426MR-G has a built-in hysteresis function to prevent output oscillation near the detection threshold.
Q: What is the package type of XC6123E426MR-G? A: XC6123E426MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.