Vedi le specifiche per i dettagli del prodotto.
XC6123D716MR-G
Product Overview
Category
XC6123D716MR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short circuit protection
Package
XC6123D716MR-G comes in a small surface mount package.
Essence
The essence of XC6123D716MR-G is to provide stable and regulated voltage to ensure proper functioning of electronic devices.
Packaging/Quantity
XC6123D716MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.0V
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123D716MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6123D716MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: It consumes minimal current when not actively regulating the voltage.
- Thermal shutdown protection: It shuts down automatically to prevent damage due to excessive heat.
- Short circuit protection: It safeguards against damage caused by short circuits.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable performance of electronic devices.
- Low dropout voltage allows for efficient power utilization.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents overheating and potential damage.
- Short circuit protection safeguards the device and connected components.
Disadvantages
- Limited input voltage range (2.5V - 6.0V) may not be suitable for all applications.
- Output voltage range (1.2V - 5.0V) may not cover all required voltage levels.
Working Principles
XC6123D716MR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It continuously monitors the input voltage and adjusts its internal components to maintain a stable output voltage within the specified range. The enable pin can be used to control the operation of the regulator.
Detailed Application Field Plans
XC6123D716MR-G is commonly used in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics - Automotive applications
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6123D716MR-G include: - LM1117-3.3: A popular linear voltage regulator with adjustable output voltage. - LT1763: A low dropout voltage regulator with high accuracy and low quiescent current. - TPS7A4700: An ultra-low noise, high PSRR voltage regulator suitable for sensitive applications.
These alternative models provide different features and specifications, allowing users to choose the most suitable option based on their specific requirements.
Word count: 452 words
10 domande e risposte comuni relative all'applicazione di XC6123D716MR-G nelle soluzioni tecniche
Sure! Here are 10 common questions and answers related to the application of XC6123D716MR-G in technical solutions:
Question: What is XC6123D716MR-G?
- Answer: XC6123D716MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring and detecting voltage levels in various electronic applications.Question: What is the operating voltage range of XC6123D716MR-G?
- Answer: The operating voltage range of XC6123D716MR-G is typically between 0.7V and 6.0V.Question: How does XC6123D716MR-G work?
- Answer: XC6123D716MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage exceeds or falls below a certain threshold, it triggers an output signal.Question: What is the output type of XC6123D716MR-G?
- Answer: XC6123D716MR-G has an open-drain output type, which means it can sink current but cannot source current.Question: What is the quiescent current consumption of XC6123D716MR-G?
- Answer: The quiescent current consumption of XC6123D716MR-G is typically around 1.0µA, making it suitable for low-power applications.Question: Can XC6123D716MR-G be used for overvoltage protection?
- Answer: No, XC6123D716MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.Question: What is the accuracy of the voltage detection threshold in XC6123D716MR-G?
- Answer: The accuracy of the voltage detection threshold in XC6123D716MR-G is typically ±1.5%.Question: Can XC6123D716MR-G be used in automotive applications?
- Answer: Yes, XC6123D716MR-G is AEC-Q100 qualified and suitable for automotive applications, provided it meets the specific requirements of the application.Question: Is XC6123D716MR-G available in different package options?
- Answer: Yes, XC6123D716MR-G is available in a SOT-23-5 package, which is a small surface-mount package commonly used in electronic devices.Question: What are some typical applications of XC6123D716MR-G?
- Answer: Some typical applications of XC6123D716MR-G include battery-powered devices, portable electronics, power management systems, and various low-power applications requiring undervoltage detection.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.