Torex Semiconductor Ltd
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6123A447MR-G
vedi dettagli Schede tecniche

XC6123A447MR-G

Product Overview

Category

XC6123A447MR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6123A447MR-G is available in a small form factor package, typically a surface mount technology (SMT) package.

Essence

The essence of XC6123A447MR-G lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

This product is usually packaged in reels or tape and reel packaging, with a specific quantity per reel.

Specifications

The specifications of XC6123A447MR-G include:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 300mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123A447MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

The functional features of XC6123A447MR-G include:

  • Voltage regulation: It ensures a stable output voltage within the specified range.
  • Overcurrent protection: It safeguards the circuit from excessive current flow.
  • Thermal shutdown protection: It prevents overheating by shutting down the device when the temperature exceeds a certain threshold.
  • Low quiescent current: It minimizes power consumption in standby mode.
  • Fast transient response: It quickly responds to changes in load conditions.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Compact size for space-constrained applications
  • Low power consumption
  • Overcurrent and thermal protection features

Disadvantages

  • Limited maximum output current (300mA)
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

XC6123A447MR-G operates based on a voltage regulation principle. It uses internal circuitry to compare the output voltage with a reference voltage and adjusts the output accordingly. By continuously monitoring the output, it ensures a stable voltage supply to the connected electronic device.

Detailed Application Field Plans

XC6123A447MR-G finds applications in various electronic devices, including but not limited to:

  1. Mobile phones
  2. Tablets
  3. Portable media players
  4. Wearable devices
  5. IoT devices
  6. Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6123A447MR-G are:

  1. XC6123B447MR-G
  2. XC6123C447MR-G
  3. XC6123D447MR-G
  4. XC6123E447MR-G

These models have slight variations in specifications or additional features, providing flexibility for different application requirements.

Note: The content provided above is approximately 400 words. Additional information can be added to meet the required word count of 1100 words.

10 domande e risposte comuni relative all'applicazione di XC6123A447MR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6123A447MR-G in technical solutions:

  1. Question: What is XC6123A447MR-G?
    - Answer: XC6123A447MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6123A447MR-G?
    - Answer: The operating voltage range of XC6123A447MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123A447MR-G work?
    - Answer: XC6123A447MR-G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage drops below the reference voltage, it triggers the output signal.

  4. Question: What is the output signal of XC6123A447MR-G?
    - Answer: The output signal of XC6123A447MR-G is an open-drain N-channel transistor that can be used to drive external devices or circuits.

  5. Question: What is the typical quiescent current consumption of XC6123A447MR-G?
    - Answer: The typical quiescent current consumption of XC6123A447MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6123A447MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123A447MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  7. Question: What is the accuracy of the voltage detection threshold in XC6123A447MR-G?
    - Answer: The accuracy of the voltage detection threshold in XC6123A447MR-G is typically ±1.5%.

  8. Question: Can XC6123A447MR-G be used in automotive applications?
    - Answer: Yes, XC6123A447MR-G is suitable for automotive applications as it can operate within the specified temperature range (-40°C to +105°C) and has a wide operating voltage range.

  9. Question: Does XC6123A447MR-G have built-in hysteresis?
    - Answer: Yes, XC6123A447MR-G has built-in hysteresis, which helps to prevent output oscillation when the input voltage is near the detection threshold.

  10. Question: What is the package type of XC6123A447MR-G?
    - Answer: XC6123A447MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.