Torex Semiconductor Ltd
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6122E726MR-G
vedi dettagli Schede tecniche

XC6122E726MR-G

Product Overview

Category

XC6122E726MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stabilization
  • Compact size
  • Low power consumption

Package

XC6122E726MR-G comes in a small surface-mount package.

Essence

The essence of XC6122E726MR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6122E726MR-G is typically packaged in reels and is available in quantities of 1000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 200mA
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E726MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122E726MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
  • Thermal shutdown: The regulator automatically shuts down if the temperature exceeds a certain threshold, protecting it from overheating.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Low power consumption helps conserve energy.
  • Provides stable voltage output, ensuring reliable operation of connected devices.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122E726MR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6122E726MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - IoT devices - Battery-powered devices - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122E726MR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 345 words

10 domande e risposte comuni relative all'applicazione di XC6122E726MR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6122E726MR-G in technical solutions:

  1. Question: What is XC6122E726MR-G?
    - Answer: XC6122E726MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122E726MR-G?
    - Answer: The operating voltage range of XC6122E726MR-G is from 0.7V to 6.0V.

  3. Question: How does XC6122E726MR-G work?
    - Answer: XC6122E726MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6122E726MR-G?
    - Answer: XC6122E726MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.

  5. Question: What is the typical quiescent current consumption of XC6122E726MR-G?
    - Answer: The typical quiescent current consumption of XC6122E726MR-G is around 1.0µA.

  6. Question: Can XC6122E726MR-G be used for overvoltage protection?
    - Answer: No, XC6122E726MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.

  7. Question: What is the accuracy of the voltage detection threshold in XC6122E726MR-G?
    - Answer: The accuracy of the voltage detection threshold in XC6122E726MR-G is typically ±1.5%.

  8. Question: Can XC6122E726MR-G be used in battery-powered applications?
    - Answer: Yes, XC6122E726MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive devices.

  9. Question: Is XC6122E726MR-G compatible with both CMOS and TTL logic levels?
    - Answer: Yes, XC6122E726MR-G is compatible with both CMOS (0V to VDD) and TTL (0V to 5V) logic levels.

  10. Question: What is the package type of XC6122E726MR-G?
    - Answer: XC6122E726MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that these answers are based on general information about XC6122E726MR-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.