Torex Semiconductor Ltd
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6122A434MR-G
vedi dettagli Schede tecniche

XC6122A434MR-G

Product Overview

Category

XC6122A434MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stabilization
  • Compact size
  • Low power consumption

Package

XC6122A434MR-G comes in a small surface mount package.

Essence

The essence of XC6122A434MR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6122A434MR-G is typically packaged in reels and each reel contains a specific quantity of units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.34V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A434MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122A434MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
  • Thermal shutdown: In case of excessive heat, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small size allows for easy integration into compact electronic devices.
  • Low power consumption helps conserve energy.
  • Provides stable voltage output, ensuring reliable performance of connected devices.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6122A434MR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6122A434MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A434MR-G are: - XC6206P332MR - XC6210B332MR - XC6220B332MR - XC6221B332MR

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 315 words

10 domande e risposte comuni relative all'applicazione di XC6122A434MR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6122A434MR-G in technical solutions:

  1. Question: What is XC6122A434MR-G?
    - Answer: XC6122A434MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6122A434MR-G?
    - Answer: The operating voltage range of XC6122A434MR-G is from 0.8V to 6.0V.

  3. Question: How does XC6122A434MR-G work?
    - Answer: XC6122A434MR-G continuously monitors the input voltage and compares it with a reference voltage. When the input voltage falls below the reference voltage, an internal reset signal is generated.

  4. Question: What is the output type of XC6122A434MR-G?
    - Answer: XC6122A434MR-G has an open-drain output type, which means it can be connected to other devices using a pull-up resistor.

  5. Question: What is the typical quiescent current consumption of XC6122A434MR-G?
    - Answer: The typical quiescent current consumption of XC6122A434MR-G is 1.0µA.

  6. Question: Can XC6122A434MR-G be used in battery-powered applications?
    - Answer: Yes, XC6122A434MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  7. Question: What is the hysteresis voltage of XC6122A434MR-G?
    - Answer: The hysteresis voltage of XC6122A434MR-G is typically 0.1V.

  8. Question: What is the operating temperature range of XC6122A434MR-G?
    - Answer: The operating temperature range of XC6122A434MR-G is from -40°C to +85°C.

  9. Question: Can XC6122A434MR-G be used in automotive applications?
    - Answer: Yes, XC6122A434MR-G is AEC-Q100 qualified and suitable for automotive applications.

  10. Question: Is XC6122A434MR-G available in different package options?
    - Answer: Yes, XC6122A434MR-G is available in a SOT-25 package, which is a small surface-mount package.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.