L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6121D616MR-G

XC6121D616MR-G

Product Overview

Category

XC6121D616MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6121D616MR-G provides a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator consumes minimal power when there is no load.
  • Overcurrent protection: It safeguards the circuit by limiting the current in case of a fault.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.

Package

XC6121D616MR-G is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of XC6121D616MR-G lies in its ability to provide stable and regulated voltage to electronic circuits, ensuring proper functioning of the connected components.

Packaging/Quantity

XC6121D616MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 1.6V
  • Maximum output current: 200mA
  • Dropout voltage: 150mV (at 100mA)
  • Quiescent current: 30µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6121D616MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: Maintains a constant output voltage regardless of input voltage variations.
  • Overcurrent protection: Safeguards the circuit by limiting the current during faults.
  • Thermal shutdown: Prevents damage by shutting down the regulator in case of excessive temperature.

Advantages and Disadvantages

Advantages

  • Stable output voltage ensures reliable operation of connected components.
  • Low dropout voltage allows efficient operation even with small voltage differentials.
  • Small form factor package enables use in space-constrained applications.
  • Overcurrent protection enhances circuit safety.
  • Thermal shutdown prevents damage due to excessive temperature.

Disadvantages

  • Limited maximum output current (200mA).
  • Input voltage range restricted to 2.5V - 6.0V.

Working Principles

XC6121D616MR-G operates based on a feedback mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved through the use of a voltage divider network and a control loop that regulates the output voltage.

Detailed Application Field Plans

XC6121D616MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

It is particularly useful in battery-powered devices where stable voltage supply is crucial for proper functionality.

Detailed and Complete Alternative Models

Some alternative models to XC6121D616MR-G include: - XC6121D616MR-G-AB: Similar specifications with additional overvoltage protection feature. - XC6121D616MR-G-CB: Higher maximum output current (300mA) with slightly increased dropout voltage. - XC6121D616MR-G-DB: Lower quiescent current (20µA) for improved power efficiency.

These alternative models provide flexibility in choosing the most suitable voltage regulator based on specific requirements.

Word count: 530

10 domande e risposte comuni relative all'applicazione di XC6121D616MR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6121D616MR-G in technical solutions:

Q1: What is XC6121D616MR-G? A1: XC6121D616MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various technical solutions to monitor and detect voltage levels.

Q2: What is the operating voltage range of XC6121D616MR-G? A2: The operating voltage range of XC6121D616MR-G is from 0.8V to 6.0V.

Q3: What is the output type of XC6121D616MR-G? A3: XC6121D616MR-G has an open-drain output type, which means it can sink current but cannot source current.

Q4: What is the typical quiescent current consumption of XC6121D616MR-G? A4: The typical quiescent current consumption of XC6121D616MR-G is around 1.0µA.

Q5: Can XC6121D616MR-G be used for overvoltage detection? A5: No, XC6121D616MR-G is specifically designed for undervoltage detection. It triggers an output when the voltage falls below a certain threshold.

Q6: What is the accuracy of the voltage detection in XC6121D616MR-G? A6: The accuracy of voltage detection in XC6121D616MR-G is typically ±1.5%.

Q7: Can XC6121D616MR-G be used in automotive applications? A7: Yes, XC6121D616MR-G is AEC-Q100 qualified, making it suitable for automotive applications.

Q8: Does XC6121D616MR-G have built-in hysteresis? A8: Yes, XC6121D616MR-G has a built-in hysteresis of typically 5%.

Q9: What is the package type of XC6121D616MR-G? A9: XC6121D616MR-G is available in a small SOT-25 package.

Q10: Can XC6121D616MR-G be used in battery-powered applications? A10: Yes, XC6121D616MR-G's low quiescent current consumption makes it suitable for battery-powered applications where power efficiency is crucial.

Please note that these answers are general and may vary depending on the specific application and requirements.