Vedi le specifiche per i dettagli del prodotto.
XC6121C643ER-G
Product Overview
Category
XC6121C643ER-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Voltage regulation capability
- Compact size
- Low power consumption
- High efficiency
Package
XC6121C643ER-G comes in a small surface-mount package.
Essence
The essence of XC6121C643ER-G lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
XC6121C643ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 25µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6121C643ER-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6121C643ER-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
- Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
- Low quiescent current: The low quiescent current ensures minimal power consumption when the device is idle.
Advantages and Disadvantages
Advantages
- Compact size allows for easy integration into space-constrained designs.
- High efficiency results in minimal power loss during voltage regulation.
- Wide operating temperature range makes it suitable for various environments.
Disadvantages
- Limited output current may not be sufficient for high-power applications.
- Dropout voltage may cause a slight voltage drop across the regulator.
Working Principles
XC6121C643ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This feedback loop ensures that the regulated voltage remains constant even when the input voltage or load conditions change.
Detailed Application Field Plans
XC6121C643ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6121C643ER-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
In conclusion, XC6121C643ER-G is a compact and efficient voltage regulator that provides stable voltage output for various electronic devices. Its wide operating temperature range and low power consumption make it suitable for diverse applications. However, its limited output current and dropout voltage should be taken into consideration when selecting this regulator for high-power applications.
10 domande e risposte comuni relative all'applicazione di XC6121C643ER-G nelle soluzioni tecniche
Sure! Here are 10 common questions and answers related to the application of XC6121C643ER-G in technical solutions:
Q1: What is XC6121C643ER-G? A1: XC6121C643ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q2: What is the operating voltage range of XC6121C643ER-G? A2: The operating voltage range of XC6121C643ER-G is typically between 0.8V and 6.0V.
Q3: What is the purpose of using XC6121C643ER-G in technical solutions? A3: XC6121C643ER-G is used to monitor the voltage level of power supplies and provide accurate detection of overvoltage, undervoltage, or power failure conditions. It helps protect sensitive components from potential damage.
Q4: How does XC6121C643ER-G detect voltage levels? A4: XC6121C643ER-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. When the voltage exceeds or falls below the threshold, it triggers an output signal.
Q5: Can XC6121C643ER-G be used in battery-powered applications? A5: Yes, XC6121C643ER-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q6: What is the output configuration of XC6121C643ER-G? A6: XC6121C643ER-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output signal.
Q7: What is the typical accuracy of XC6121C643ER-G? A7: The typical accuracy of XC6121C643ER-G is ±2% of the detection voltage.
Q8: Can XC6121C643ER-G be used in automotive applications? A8: Yes, XC6121C643ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q9: What is the maximum operating temperature range of XC6121C643ER-G? A9: The maximum operating temperature range of XC6121C643ER-G is -40°C to +105°C.
Q10: Is XC6121C643ER-G available in different package options? A10: Yes, XC6121C643ER-G is available in various package options, including SOT-25 and USP-6B, providing flexibility for different PCB layouts and space constraints.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.