XC6119C42ANR-G belongs to the category of integrated circuits (ICs).
It is commonly used as a voltage detector in various electronic devices.
XC6119C42ANR-G is packaged in a SOT-23-5 package. It is available in reels with a quantity of 3000 units per reel.
The XC6119C42ANR-G has the following pin configuration:
```
| | --|----|-- |____| ```
Pin 1: GND (Ground) Pin 2: VDD (Supply Voltage) Pin 3: N.C. (No Connection) Pin 4: RESET (Reset Output) Pin 5: N.C. (No Connection)
The XC6119C42ANR-G works based on the principle of comparing the input voltage with an internal reference voltage. When the input voltage falls below the threshold level, the reset output is activated, indicating a low voltage condition.
The XC6119C42ANR-G is widely used in various electronic devices that require voltage monitoring and reset functionality. Some application fields include:
Note: Please refer to the manufacturer's datasheet for detailed specifications and compatibility information.
Word Count: 420
Sure! Here are 10 common questions and answers related to the application of XC6119C42ANR-G in technical solutions:
Q: What is XC6119C42ANR-G? A: XC6119C42ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.
Q: What is the operating voltage range of XC6119C42ANR-G? A: The operating voltage range of XC6119C42ANR-G is typically between 0.8V and 6.0V.
Q: How does XC6119C42ANR-G help in technical solutions? A: XC6119C42ANR-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and trigger actions or alarms when it goes below a specified level.
Q: Can XC6119C42ANR-G be used in battery-powered applications? A: Yes, XC6119C42ANR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q: What is the output type of XC6119C42ANR-G? A: XC6119C42ANR-G has an open-drain output type, which means it can be easily interfaced with other digital circuits.
Q: What is the typical accuracy of XC6119C42ANR-G? A: The typical accuracy of XC6119C42ANR-G is ±1.5%.
Q: Can XC6119C42ANR-G be used in automotive applications? A: Yes, XC6119C42ANR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: Does XC6119C42ANR-G have built-in hysteresis? A: Yes, XC6119C42ANR-G has a built-in hysteresis of typically 50mV, which helps to prevent oscillations near the threshold voltage.
Q: What is the package type of XC6119C42ANR-G? A: XC6119C42ANR-G is available in a SOT-23-5 package, which is a small surface-mount package.
Q: Can XC6119C42ANR-G be used in industrial control systems? A: Yes, XC6119C42ANR-G can be used in industrial control systems as it operates reliably in a wide temperature range (-40°C to +85°C) and has good noise immunity.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.