L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6119C17ANR-G

XC6119C17ANR-G

Product Overview

Category

XC6119C17ANR-G belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage detector in electronic devices.

Characteristics

  • Low power consumption
  • High accuracy
  • Wide operating voltage range
  • Small package size

Package

XC6119C17ANR-G is available in a small surface mount package.

Essence

The essence of XC6119C17ANR-G lies in its ability to accurately detect and monitor voltage levels in electronic circuits.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Operating Voltage Range: 1.6V to 6.0V
  • Detection Voltage Accuracy: ±1.5%
  • Quiescent Current: 1μA (typical)
  • Output Configuration: Open-drain
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6119C17ANR-G has the following pin configuration:

  1. VDD: Power supply input
  2. GND: Ground reference
  3. OUT: Output pin for voltage detection

Functional Features

  • Voltage detection: XC6119C17ANR-G can accurately detect the voltage level within the specified range.
  • Open-drain output: The open-drain configuration allows for easy integration with other circuitry.
  • Low power consumption: With a quiescent current of only 1μA, it minimizes power consumption in battery-powered applications.

Advantages and Disadvantages

Advantages

  • High accuracy voltage detection
  • Wide operating voltage range
  • Low power consumption
  • Small package size

Disadvantages

  • Limited output options (open-drain only)
  • Not suitable for high voltage applications

Working Principles

XC6119C17ANR-G works by comparing the input voltage with a reference voltage. When the input voltage crosses the detection threshold, the output pin switches to a low state (0V). This can be used to trigger other circuitry or provide an indication of the voltage level.

Detailed Application Field Plans

XC6119C17ANR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Power management systems - Consumer electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6119C17ANR-G are: - XC6119C17AMR-G - XC6119C17BNR-G - XC6119C17DNR-G

These models may have slight variations in specifications or package options, but they serve the same purpose of voltage detection in electronic circuits.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)

10 domande e risposte comuni relative all'applicazione di XC6119C17ANR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6119C17ANR-G in technical solutions:

  1. Q: What is XC6119C17ANR-G? A: XC6119C17ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6119C17ANR-G? A: The operating voltage range of XC6119C17ANR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6119C17ANR-G work? A: XC6119C17ANR-G compares the input voltage with a reference voltage internally. When the input voltage falls below the reference voltage, it generates a reset signal.

  4. Q: What is the typical reset voltage threshold of XC6119C17ANR-G? A: The typical reset voltage threshold of XC6119C17ANR-G is 1.7V.

  5. Q: Can XC6119C17ANR-G be used in battery-powered applications? A: Yes, XC6119C17ANR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes low quiescent current.

  6. Q: Is XC6119C17ANR-G suitable for automotive applications? A: Yes, XC6119C17ANR-G is suitable for automotive applications as it meets the required specifications for automotive electronics.

  7. Q: Does XC6119C17ANR-G have built-in hysteresis? A: Yes, XC6119C17ANR-G has built-in hysteresis to prevent oscillation and ensure stable operation.

  8. Q: Can XC6119C17ANR-G be used in high-temperature environments? A: Yes, XC6119C17ANR-G is designed to operate in a wide temperature range, including high-temperature environments.

  9. Q: What is the output type of XC6119C17ANR-G? A: XC6119C17ANR-G has an open-drain output, which requires an external pull-up resistor.

  10. Q: Are there any application notes or reference designs available for XC6119C17ANR-G? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of XC6119C17ANR-G in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6119C17ANR-G.