Torex Semiconductor Ltd
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6118N18AMR-G
vedi dettagli Schede tecniche

XC6118N18AMR-G

Product Overview

Category

XC6118N18AMR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stabilization
  • Compact size
  • Low power consumption

Package

XC6118N18AMR-G comes in a small surface-mount package.

Essence

The essence of XC6118N18AMR-G is to provide a stable and regulated voltage supply to electronic devices.

Packaging/Quantity

XC6118N18AMR-G is typically packaged in reels and is available in quantities of 1000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N18AMR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6118N18AMR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to protect itself and the circuit.

Advantages and Disadvantages

Advantages

  • Small size allows for easy integration into compact electronic devices.
  • Low power consumption helps conserve energy.
  • Provides stable voltage output even under varying load conditions.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6118N18AMR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations and load changes.

Detailed Application Field Plans

XC6118N18AMR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N18AMR-G are: - XC6206P182MR - LM1117IMPX-1.8/NOPB - MCP1700T-1802E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 320 words

10 domande e risposte comuni relative all'applicazione di XC6118N18AMR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6118N18AMR-G in technical solutions:

  1. Q: What is XC6118N18AMR-G? A: XC6118N18AMR-G is a voltage detector IC manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6118N18AMR-G? A: The operating voltage range of XC6118N18AMR-G is typically between 0.7V and 6.0V.

  3. Q: How does XC6118N18AMR-G work? A: XC6118N18AMR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.

  4. Q: What is the output type of XC6118N18AMR-G? A: XC6118N18AMR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Q: What is the typical quiescent current of XC6118N18AMR-G? A: The typical quiescent current of XC6118N18AMR-G is around 1.0µA, making it suitable for low-power applications.

  6. Q: Can XC6118N18AMR-G be used for overvoltage protection? A: No, XC6118N18AMR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  7. Q: What is the accuracy of the voltage detection threshold in XC6118N18AMR-G? A: The accuracy of the voltage detection threshold in XC6118N18AMR-G is typically ±1.5%.

  8. Q: Can XC6118N18AMR-G be used in automotive applications? A: Yes, XC6118N18AMR-G is AEC-Q100 qualified and can be used in automotive applications that require undervoltage monitoring.

  9. Q: Does XC6118N18AMR-G have built-in hysteresis? A: Yes, XC6118N18AMR-G has a built-in hysteresis of typically 50mV, which helps to prevent oscillation near the detection threshold.

  10. Q: What is the package type of XC6118N18AMR-G? A: XC6118N18AMR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.