Vedi le specifiche per i dettagli del prodotto.
XC6118C30AMR-G
Product Overview
Category
XC6118C30AMR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Package: SOT-23-5
- Essence: Low dropout voltage regulator
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
The specifications of XC6118C30AMR-G are as follows:
- Output Voltage: 3.0V
- Input Voltage Range: 2.5V - 6.0V
- Dropout Voltage: 200mV (typical)
- Output Current: 150mA (maximum)
- Quiescent Current: 40µA (typical)
- Line Regulation: ±0.1% (typical)
- Load Regulation: ±0.4% (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6118C30AMR-G has a total of five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: NC (No Connection) Pin 4: VOUT (Output Voltage) Pin 5: CE (Chip Enable)
Functional Features
- Low dropout voltage: The XC6118C30AMR-G has a low dropout voltage of only 200mV, allowing it to regulate voltage efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: With a typical quiescent current of only 40µA, this voltage regulator minimizes power consumption when the load is light.
- Overcurrent protection: The device incorporates overcurrent protection, safeguarding the circuit from excessive current flow and potential damage.
Advantages and Disadvantages
Advantages
- Low dropout voltage ensures efficient voltage regulation.
- Low quiescent current minimizes power consumption.
- Overcurrent protection enhances circuit safety.
Disadvantages
- Limited output current of 150mA may not be suitable for high-power applications.
- No adjustable output voltage option available.
Working Principles
The XC6118C30AMR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage obtained from a voltage divider connected to the output. The pass transistor adjusts its resistance to maintain a stable output voltage despite variations in the input voltage and load conditions.
Detailed Application Field Plans
XC6118C30AMR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C30AMR-G are: - XC6206P302MR-G - LM1117IMPX-3.0/NOPB - MCP1700T-3002E/TT
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and availability.
Word count: 346 words
10 domande e risposte comuni relative all'applicazione di XC6118C30AMR-G nelle soluzioni tecniche
Sure! Here are 10 common questions and answers related to the application of XC6118C30AMR-G in technical solutions:
Q: What is XC6118C30AMR-G? A: XC6118C30AMR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C30AMR-G? A: The operating voltage range of XC6118C30AMR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C30AMR-G help in technical solutions? A: XC6118C30AMR-G ensures stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent malfunctions during power fluctuations or brownouts.
Q: Can XC6118C30AMR-G be used in battery-powered applications? A: Yes, XC6118C30AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output type of XC6118C30AMR-G? A: XC6118C30AMR-G has an open-drain output type, which means it can be easily connected to other devices with different voltage levels.
Q: What is the typical reset threshold voltage of XC6118C30AMR-G? A: The typical reset threshold voltage of XC6118C30AMR-G is 3.0V.
Q: Can XC6118C30AMR-G generate a reset signal with a delay? A: No, XC6118C30AMR-G does not have a built-in delay function. The reset signal is generated immediately when the voltage drops below the threshold.
Q: Is XC6118C30AMR-G suitable for automotive applications? A: Yes, XC6118C30AMR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6118C30AMR-G be used in industrial control systems? A: Yes, XC6118C30AMR-G can be used in industrial control systems to ensure stable operation and protect against power supply fluctuations.
Q: What is the package type of XC6118C30AMR-G? A: XC6118C30AMR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.