Torex Semiconductor Ltd
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6108N25BGR-G
vedi dettagli Schede tecniche

XC6108N25BGR-G

Product Overview

Category

XC6108N25BGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation capability
  • Low dropout voltage
  • High output current capacity
  • Thermal shutdown protection
  • Short-circuit protection

Package

XC6108N25BGR-G is available in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of XC6108N25BGR-G lies in its ability to provide stable and regulated voltage to ensure proper functioning of electronic components.

Packaging/Quantity

XC6108N25BGR-G is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of the product.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N25BGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage Regulation: XC6108N25BGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low Dropout Voltage: It maintains a low voltage drop between the input and output, minimizing power loss.
  • Thermal Shutdown Protection: The regulator automatically shuts down if the temperature exceeds a certain threshold, preventing damage.
  • Short-Circuit Protection: It safeguards against short circuits, protecting both the regulator and connected components.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Low dropout voltage
  • High output current capacity
  • Thermal and short-circuit protection

Disadvantages

  • Limited output voltage options
  • Not suitable for high-power applications

Working Principles

XC6108N25BGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6108N25BGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N25BGR-G are: - XC6201P182MR - LM1117IMPX-1.8/NOPB - MCP1700T-1802E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6108N25BGR-G is a voltage regulator that provides stable and regulated voltage for electronic circuits. With its low dropout voltage, high output current capacity, and built-in protection features, it is widely used in various portable electronic devices.

10 domande e risposte comuni relative all'applicazione di XC6108N25BGR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6108N25BGR-G in technical solutions:

  1. Q: What is XC6108N25BGR-G? A: XC6108N25BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108N25BGR-G? A: The operating voltage range of XC6108N25BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N25BGR-G help in technical solutions? A: XC6108N25BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level.

  4. Q: What is the typical reset voltage threshold of XC6108N25BGR-G? A: The typical reset voltage threshold of XC6108N25BGR-G is 2.5V.

  5. Q: Can XC6108N25BGR-G be used in battery-powered applications? A: Yes, XC6108N25BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: Does XC6108N25BGR-G have any built-in delay for the reset signal? A: Yes, XC6108N25BGR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.

  7. Q: Is XC6108N25BGR-G suitable for automotive applications? A: Yes, XC6108N25BGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: Can XC6108N25BGR-G be used in industrial control systems? A: Yes, XC6108N25BGR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +105°C.

  9. Q: Does XC6108N25BGR-G have any additional features? A: Yes, XC6108N25BGR-G has an open-drain output and a manual reset input pin for added flexibility in system design.

  10. Q: Is XC6108N25BGR-G available in different package options? A: Yes, XC6108N25BGR-G is available in various package options, including SOT-23-5 and USP-6C, to suit different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108N25BGR-G.