Torex Semiconductor Ltd
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6108N12AMR-G
vedi dettagli Schede tecniche

XC6108N12AMR-G

Product Overview

Category

XC6108N12AMR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6108N12AMR-G comes in a small surface-mount package.

Essence

The essence of XC6108N12AMR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.2V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N12AMR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108N12AMR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
  • Low quiescent current: The device consumes minimal current when not actively regulating voltage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • High efficiency minimizes power loss during voltage regulation.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6108N12AMR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6108N12AMR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N12AMR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 311 words

10 domande e risposte comuni relative all'applicazione di XC6108N12AMR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6108N12AMR-G in technical solutions:

  1. Q: What is XC6108N12AMR-G? A: XC6108N12AMR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108N12AMR-G? A: The operating voltage range of XC6108N12AMR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N12AMR-G work? A: XC6108N12AMR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.

  4. Q: What is the output type of XC6108N12AMR-G? A: XC6108N12AMR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor.

  5. Q: Can XC6108N12AMR-G be used in battery-powered applications? A: Yes, XC6108N12AMR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Q: What is the typical reset threshold voltage of XC6108N12AMR-G? A: The typical reset threshold voltage of XC6108N12AMR-G is 1.2V, but it can be adjusted using external resistors.

  7. Q: Is XC6108N12AMR-G suitable for automotive applications? A: Yes, XC6108N12AMR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  8. Q: Can XC6108N12AMR-G be used in high-temperature environments? A: Yes, XC6108N12AMR-G has a wide operating temperature range of -40°C to +105°C, making it suitable for high-temperature environments.

  9. Q: Does XC6108N12AMR-G have built-in overvoltage protection? A: No, XC6108N12AMR-G does not have built-in overvoltage protection. Additional circuitry may be required to protect against overvoltage conditions.

  10. Q: What package options are available for XC6108N12AMR-G? A: XC6108N12AMR-G is available in various package options, including SOT-23-5 and USP-6B.