L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6108N08DGR-G

XC6108N08DGR-G

Product Overview

Category

XC6108N08DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108N08DGR-G is available in a small surface-mount package.

Essence

The essence of XC6108N08DGR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6108N08DGR-G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 0.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N08DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108N08DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small size allows for easy integration into compact electronic devices.
  • Low power consumption helps conserve energy.
  • Provides stable voltage output, ensuring reliable performance of connected devices.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6108N08DGR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6108N08DGR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N08DGR-G are: - LM317T - LT1084CP-5 - ADP3339AKCZ-2.5-R7 - TPS7A4700RGWT

These models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, XC6108N08DGR-G is a voltage regulator that provides stable voltage output for electronic devices. Its compact size, low power consumption, and reliable performance make it suitable for various applications. However, its limited output current and dropout voltage should be taken into consideration when selecting an appropriate model.

10 domande e risposte comuni relative all'applicazione di XC6108N08DGR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6108N08DGR-G in technical solutions:

  1. Q: What is XC6108N08DGR-G? A: XC6108N08DGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108N08DGR-G? A: The operating voltage range of XC6108N08DGR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6108N08DGR-G work? A: XC6108N08DGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.

  4. Q: What is the output type of XC6108N08DGR-G? A: XC6108N08DGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.

  5. Q: Can XC6108N08DGR-G be used in battery-powered applications? A: Yes, XC6108N08DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: What is the accuracy of the voltage detection in XC6108N08DGR-G? A: The voltage detection accuracy of XC6108N08DGR-G is typically ±1.0%.

  7. Q: Does XC6108N08DGR-G have built-in hysteresis? A: Yes, XC6108N08DGR-G has built-in hysteresis, which helps prevent false triggering due to voltage fluctuations.

  8. Q: Can XC6108N08DGR-G be used in automotive applications? A: Yes, XC6108N08DGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Q: What is the temperature range of XC6108N08DGR-G? A: The operating temperature range of XC6108N08DGR-G is typically between -40°C and +85°C.

  10. Q: Is XC6108N08DGR-G available in different package options? A: Yes, XC6108N08DGR-G is available in various package options, such as SOT-25 and USP-4B, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108N08DGR-G.