Torex Semiconductor Ltd
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
XC6108C16AMR-G
vedi dettagli Schede tecniche

XC6108C16AMR-G

Product Overview

Category

XC6108C16AMR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stabilization
  • Compact size
  • Low power consumption

Package

XC6108C16AMR-G comes in a small surface-mount package.

Essence

The essence of XC6108C16AMR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.6V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C16AMR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small size allows for space-saving designs
  • Low power consumption increases overall efficiency
  • Provides stable voltage output even under varying input conditions

Disadvantages

  • Limited output current capacity (100mA)
  • Not suitable for high-power applications

Working Principles

XC6108C16AMR-G works by regulating the input voltage to a stable output voltage of 1.6V. It achieves this through internal circuitry that adjusts the voltage based on the feedback received from the output pin.

Detailed Application Field Plans

XC6108C16AMR-G is commonly used in various electronic devices and circuits, including:

  • Battery-powered devices
  • Portable consumer electronics
  • IoT devices
  • Wearable devices
  • Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C16AMR-G are:

  1. XC6206P162MR: Similar voltage regulator with a slightly higher output current capacity.
  2. LM1117MPX-1.6/NOPB: Voltage regulator with adjustable output voltage.
  3. MCP1700T-1602E/TT: Low dropout voltage regulator with similar specifications.

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, XC6108C16AMR-G is a voltage regulator that provides stable and regulated voltage output for electronic devices. Its compact size, low power consumption, and various protection features make it suitable for a wide range of applications. However, its limited output current capacity may restrict its use in high-power applications.

10 domande e risposte comuni relative all'applicazione di XC6108C16AMR-G nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of XC6108C16AMR-G in technical solutions:

  1. Q: What is XC6108C16AMR-G? A: XC6108C16AMR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108C16AMR-G? A: The operating voltage range of XC6108C16AMR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C16AMR-G work? A: XC6108C16AMR-G continuously monitors the input voltage and generates a reset signal when the voltage falls below a certain threshold.

  4. Q: What is the typical reset threshold voltage of XC6108C16AMR-G? A: The typical reset threshold voltage of XC6108C16AMR-G is 1.6V.

  5. Q: Can XC6108C16AMR-G be used in battery-powered applications? A: Yes, XC6108C16AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: Is XC6108C16AMR-G suitable for automotive applications? A: Yes, XC6108C16AMR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  7. Q: Does XC6108C16AMR-G have any built-in delay time for the reset signal? A: Yes, XC6108C16AMR-G has a built-in delay time of typically 200ms to prevent false resets during power supply fluctuations.

  8. Q: Can XC6108C16AMR-G be used in a wide temperature range? A: Yes, XC6108C16AMR-G has an operating temperature range of -40°C to +105°C, making it suitable for various environments.

  9. Q: What is the package type of XC6108C16AMR-G? A: XC6108C16AMR-G is available in a small SOT-23-5 package, which is commonly used in compact electronic designs.

  10. Q: Are there any application notes or reference designs available for XC6108C16AMR-G? A: Yes, Torex Semiconductor provides application notes and reference designs on their website to assist with the implementation of XC6108C16AMR-G in different technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6108C16AMR-G.