Texas Instruments
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
TS5USBC402YFPT
vedi dettagli Schede tecniche

TS5USBC402YFPT

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: USB Type-C and USB Power Delivery (PD) Switch
  • Characteristics:
    • High-speed data switching
    • Support for USB PD protocol
    • Low power consumption
    • Compact package size
  • Package: 16-pin TQFN (Thin Quad Flat No-Lead)
  • Essence: This IC is designed to provide high-speed data switching and support for USB PD in USB Type-C applications.
  • Packaging/Quantity: Available in tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • On-State Resistance (RON): 0.45Ω (typical)
  • Maximum Continuous Current: 3A
  • USB PD Support: Up to 100W

Detailed Pin Configuration

  1. VBUS
  2. CC1
  3. CC2
  4. GND
  5. SBU1
  6. SBU2
  7. D-
  8. D+
  9. VCONN
  10. VDD
  11. EN
  12. IN
  13. OUT
  14. FLT
  15. GND
  16. NC

Functional Features

  • High-speed data switching between USB Type-C ports
  • Support for USB PD negotiation and power delivery
  • Overcurrent protection and fault detection
  • Hot-plug capability
  • Low power consumption in standby mode

Advantages

  • Enables seamless data transfer and power delivery in USB Type-C applications
  • Compact package size allows for space-saving designs
  • Supports high-speed data rates and USB PD up to 100W
  • Provides overcurrent protection and fault detection for enhanced safety

Disadvantages

  • Limited to USB Type-C applications and may not be compatible with other USB standards
  • Requires proper configuration and integration into the target system for optimal performance

Working Principles

The TS5USBC402YFPT is a USB Type-C and USB PD switch IC that operates by selectively connecting or disconnecting the data and power lines between two USB Type-C ports. It utilizes internal circuitry to detect the presence of USB PD negotiation signals and enables power delivery according to the negotiated power profile. The IC also incorporates overcurrent protection and fault detection mechanisms to ensure safe operation.

Detailed Application Field Plans

The TS5USBC402YFPT is primarily used in USB Type-C applications that require high-speed data switching and USB PD support. Some common application fields include: - Mobile devices (smartphones, tablets) - Laptop computers - Docking stations - USB hubs - USB Type-C accessories

Detailed and Complete Alternative Models

  1. TS5USBC402YFPR: Similar to TS5USBC402YFPT but available in a different package (16-pin QFN).
  2. TS5USBC402YFPWR: Similar to TS5USBC402YFPT but available in a smaller package (12-pin WSON).

Note: This list is not exhaustive, and there may be other alternative models available from different manufacturers.

Word count: 400 words

10 domande e risposte comuni relative all'applicazione di TS5USBC402YFPT nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of TS5USBC402YFPT in technical solutions:

  1. Q: What is TS5USBC402YFPT? A: TS5USBC402YFPT is a USB Type-C multiplexer/demultiplexer switch used for signal routing and power delivery in technical solutions.

  2. Q: What are the key features of TS5USBC402YFPT? A: The key features include low insertion loss, high bandwidth, support for USB 3.2 Gen 2 data rates, and compatibility with USB Power Delivery (PD) specifications.

  3. Q: How can TS5USBC402YFPT be used in technical solutions? A: It can be used to switch between different USB Type-C ports, route signals between devices, enable power delivery negotiation, and manage USB data transfer.

  4. Q: Can TS5USBC402YFPT handle high-speed data transmission? A: Yes, TS5USBC402YFPT supports USB 3.2 Gen 2 data rates, allowing for high-speed data transmission up to 10 Gbps.

  5. Q: Does TS5USBC402YFPT support USB Power Delivery (PD)? A: Yes, TS5USBC402YFPT is compatible with USB PD specifications, enabling power delivery negotiation between devices.

  6. Q: What is the power handling capability of TS5USBC402YFPT? A: TS5USBC402YFPT can handle up to 100W of power delivery, making it suitable for charging laptops, smartphones, and other power-hungry devices.

  7. Q: Is TS5USBC402YFPT compatible with different USB Type-C standards? A: Yes, TS5USBC402YFPT is designed to be compatible with various USB Type-C standards, ensuring interoperability across different devices.

  8. Q: Can TS5USBC402YFPT be used in both mobile and desktop applications? A: Yes, TS5USBC402YFPT is versatile and can be used in a wide range of applications, including mobile phones, tablets, laptops, desktops, and other electronic devices.

  9. Q: Does TS5USBC402YFPT require any external components for operation? A: No, TS5USBC402YFPT is a standalone device and does not require any additional external components for its operation.

  10. Q: Are there any application notes or reference designs available for TS5USBC402YFPT? A: Yes, Texas Instruments provides application notes, reference designs, and technical documentation to assist in the implementation of TS5USBC402YFPT in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific use cases and requirements. It is always recommended to refer to the datasheet and technical documentation for accurate information.