The TPS3824-30DBVRG4 belongs to the category of voltage supervisors.
This product is primarily used for monitoring and supervising the voltage levels in electronic systems.
The TPS3824-30DBVRG4 is available in a small SOT-23-5 package. It is typically sold in reels, with a quantity of 3000 units per reel.
The TPS3824-30DBVRG4 has the following pin configuration:
```
| | --| RESET | --| GND | --| MR | --| VDD | --| VIT | |___________| ```
The TPS3824-30DBVRG4 operates by continuously monitoring the voltage level at the VIT pin. If the voltage falls below the adjustable threshold, the reset output is asserted, indicating a low-voltage condition. The power-on reset delay ensures that the reset output remains active for a specified period after power is applied or restored.
The TPS3824-30DBVRG4 finds applications in various fields, including: 1. Automotive electronics: Ensuring reliable voltage monitoring in automotive systems. 2. Industrial automation: Providing voltage supervision in industrial control systems. 3. Consumer electronics: Enhancing the stability of electronic devices by monitoring voltage levels. 4. Telecommunications: Safeguarding critical components by detecting voltage fluctuations.
These alternative models offer similar functionality and can be considered based on specific system requirements.
Word count: 511 words
Sure! Here are 10 common questions and answers related to the application of TPS3824-30DBVRG4 in technical solutions:
Q: What is the TPS3824-30DBVRG4? A: The TPS3824-30DBVRG4 is a voltage supervisor and reset IC designed to monitor the power supply voltage in electronic systems.
Q: What is the operating voltage range of TPS3824-30DBVRG4? A: The operating voltage range of TPS3824-30DBVRG4 is from 2.5V to 6V.
Q: What is the purpose of using TPS3824-30DBVRG4 in a technical solution? A: TPS3824-30DBVRG4 ensures proper system initialization by monitoring the power supply voltage and generating a reset signal when it falls below a specified threshold.
Q: How does TPS3824-30DBVRG4 generate a reset signal? A: TPS3824-30DBVRG4 generates a reset signal by pulling the RESET pin low when the monitored voltage drops below the threshold voltage.
Q: Can TPS3824-30DBVRG4 be used in battery-powered applications? A: Yes, TPS3824-30DBVRG4 can be used in battery-powered applications as it operates within a wide voltage range and has low quiescent current consumption.
Q: What is the typical reset threshold voltage of TPS3824-30DBVRG4? A: The typical reset threshold voltage of TPS3824-30DBVRG4 is 3.0V.
Q: Does TPS3824-30DBVRG4 have a manual reset input? A: No, TPS3824-30DBVRG4 does not have a manual reset input. The reset signal is generated automatically based on the monitored voltage.
Q: Can TPS3824-30DBVRG4 be used in automotive applications? A: Yes, TPS3824-30DBVRG4 is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: What is the typical response time of TPS3824-30DBVRG4? A: The typical response time of TPS3824-30DBVRG4 is 20µs.
Q: Does TPS3824-30DBVRG4 have an adjustable reset threshold voltage? A: No, TPS3824-30DBVRG4 has a fixed reset threshold voltage of 3.0V and does not provide adjustment options.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.