L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
TLIN1024RGYTQ1

TLIN1024RGYTQ1

Product Overview

  • Category: Integrated Circuit
  • Use: Communication and Networking
  • Characteristics: High-speed data transmission, low power consumption
  • Package: QFN (Quad Flat No-leads)
  • Essence: Transceiver IC for Local Interconnect Network (LIN) bus systems
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Operating Voltage: 3.3V
  • Data Rate: Up to 20 kbps
  • Number of Channels: 1
  • Operating Temperature Range: -40°C to +125°C
  • Interface: SPI (Serial Peripheral Interface)

Detailed Pin Configuration

The TLIN1024RGYTQ1 has the following pin configuration:

  1. VBAT: Battery Supply Voltage
  2. GND: Ground
  3. TXD: Transmit Data
  4. RXD: Receive Data
  5. WAKE: Wake-up Input
  6. LIN: LIN Bus Interface
  7. SCLK: Serial Clock
  8. CS: Chip Select
  9. EN: Enable Input
  10. VIO: Digital Supply Voltage

Functional Features

  • Supports LIN protocol version 2.1 and 2.2
  • Integrated LIN transceiver with voltage regulator
  • Low quiescent current in sleep mode for power efficiency
  • Built-in protection features against short circuits and overtemperature conditions
  • Wake-up capability from sleep mode via external signal

Advantages and Disadvantages

Advantages

  • Compact package size allows for space-saving designs
  • Low power consumption extends battery life in portable applications
  • Robust protection features enhance system reliability
  • Wide operating temperature range enables use in harsh environments

Disadvantages

  • Limited to a single LIN channel, not suitable for multi-channel applications
  • Relatively low data rate compared to other communication protocols

Working Principles

The TLIN1024RGYTQ1 is designed to facilitate communication between electronic control units (ECUs) in automotive LIN bus systems. It operates as a transceiver, converting digital signals from the microcontroller into LIN bus signals and vice versa. The integrated voltage regulator ensures stable power supply for the IC.

When in sleep mode, the TLIN1024RGYTQ1 consumes minimal power, allowing for energy-efficient operation. It can be awakened by an external wake-up signal, enabling timely communication when needed.

Detailed Application Field Plans

The TLIN1024RGYTQ1 is primarily used in automotive applications, where it enables communication between various ECUs within a vehicle. It finds application in areas such as:

  1. Body Control Modules (BCMs)
  2. Door Control Units
  3. Seat Control Units
  4. Climate Control Systems
  5. Lighting Control Modules

Detailed and Complete Alternative Models

  1. TLIN2024RGYTQ1: Dual-channel LIN transceiver with similar specifications
  2. TLIN3024RGYTQ1: Triple-channel LIN transceiver with similar specifications
  3. TLIN4024RGYTQ1: Quad-channel LIN transceiver with similar specifications

These alternative models offer increased channel count for applications requiring multiple LIN channels.

Word Count: 320 words

10 domande e risposte comuni relative all'applicazione di TLIN1024RGYTQ1 nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of TLIN1024RGYTQ1 in technical solutions:

1. What is TLIN1024RGYTQ1? TLIN1024RGYTQ1 is a transceiver IC (Integrated Circuit) that is specifically designed for automotive LIN (Local Interconnect Network) applications.

2. What is the purpose of TLIN1024RGYTQ1? The purpose of TLIN1024RGYTQ1 is to enable communication between various electronic control units (ECUs) in automotive systems, such as body control modules, door modules, and climate control modules.

3. What are the key features of TLIN1024RGYTQ1? Some key features of TLIN1024RGYTQ1 include a LIN bus interface, support for LIN protocol versions 1.3, 2.0, and 2.1, low quiescent current consumption, and built-in protection features.

4. How does TLIN1024RGYTQ1 connect to other ECUs? TLIN1024RGYTQ1 connects to other ECUs through a LIN bus, which is a single-wire serial communication interface commonly used in automotive applications.

5. Can TLIN1024RGYTQ1 be used in non-automotive applications? While TLIN1024RGYTQ1 is primarily designed for automotive applications, it can also be used in other industrial or consumer electronics applications that require LIN communication.

6. What is the maximum data rate supported by TLIN1024RGYTQ1? TLIN1024RGYTQ1 supports a maximum data rate of 20 kbps (kilobits per second), which is the standard data rate for LIN communication.

7. Does TLIN1024RGYTQ1 have any built-in protection features? Yes, TLIN1024RGYTQ1 has built-in protection features such as thermal shutdown, overvoltage protection, and short-circuit protection to ensure reliable operation in harsh automotive environments.

8. Can TLIN1024RGYTQ1 be used in a multi-master LIN network? Yes, TLIN1024RGYTQ1 can be used in a multi-master LIN network where multiple ECUs can act as masters and communicate with each other on the LIN bus.

9. What is the operating voltage range of TLIN1024RGYTQ1? TLIN1024RGYTQ1 operates within a voltage range of 3.0V to 5.5V, making it compatible with a wide range of automotive and industrial power supplies.

10. Is TLIN1024RGYTQ1 compliant with automotive industry standards? Yes, TLIN1024RGYTQ1 is compliant with various automotive industry standards such as ISO 17987-4, which ensures interoperability and compatibility with other LIN devices.

Please note that these answers are general and may vary depending on the specific application and requirements.