Vedi le specifiche per i dettagli del prodotto.
TLC27L4ING4
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-power, Rail-to-Rail Input/Output, Quad Operational Amplifier
- Package: DIP-14 (Dual In-Line Package with 14 pins)
- Essence: The TLC27L4ING4 is a low-power quad operational amplifier designed for general-purpose applications.
- Packaging/Quantity: Available in tubes or reels, with 50 units per tube/reel.
Specifications
- Supply Voltage: ±2V to ±16V
- Input Offset Voltage: 1.5mV (maximum)
- Input Bias Current: 0.25pA (typical)
- Slew Rate: 3.6V/µs (typical)
- Gain Bandwidth Product: 1MHz (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The TLC27L4ING4 has a DIP-14 package with the following pin configuration:
__ __
Vcc | 1 \_/ 14 | Vcc+
Vin-| 2 13 | Vin+
Vin+| 3 12 | Out+
Gnd | 4 11 | Out-
Out-| 5 10 | Vin-
Out+| 6 9 | NC
NC | 7 8 | NC
|___________|
Functional Features
- Low-power consumption: The TLC27L4ING4 operates at a low supply voltage and consumes minimal power, making it suitable for battery-powered devices.
- Rail-to-Rail Input/Output: This operational amplifier supports input and output signals that can swing close to the supply rails, allowing for maximum dynamic range.
- Quad Operational Amplifier: The TLC27L4ING4 contains four independent operational amplifiers in a single package, providing flexibility and space-saving benefits.
Advantages and Disadvantages
Advantages: - Low power consumption extends battery life in portable devices. - Rail-to-Rail input/output capability allows for a wide dynamic range. - Four amplifiers in one package save board space and reduce component count.
Disadvantages: - Limited gain bandwidth product compared to higher-performance operational amplifiers. - Not suitable for applications requiring high-speed signal processing.
Working Principles
The TLC27L4ING4 is based on a differential amplifier configuration. It amplifies the voltage difference between its two input terminals and produces an output voltage proportional to this difference. The internal circuitry of the operational amplifier ensures stability, low noise, and accurate amplification.
Detailed Application Field Plans
The TLC27L4ING4 is commonly used in various applications, including but not limited to: - Audio amplification - Sensor signal conditioning - Signal filtering - Voltage and current measurement - Active filters - Data acquisition systems
Detailed and Complete Alternative Models
- LM324: Similar quad operational amplifier with a wider temperature range (-55°C to +125°C).
- TL074: Quad operational amplifier with higher gain bandwidth product (4MHz) and lower input offset voltage (3mV).
These alternative models offer similar functionality and can be considered as replacements for the TLC27L4ING4 depending on specific requirements.
Word count: 314 words
10 domande e risposte comuni relative all'applicazione di TLC27L4ING4 nelle soluzioni tecniche
Sure! Here are 10 common questions and answers related to the application of TLC27L4ING4 in technical solutions:
Q: What is the TLC27L4ING4? A: The TLC27L4ING4 is a low-power, quad operational amplifier (op-amp) designed for various applications in technical solutions.
Q: What are the key features of the TLC27L4ING4? A: The key features include low power consumption, rail-to-rail input/output operation, wide supply voltage range, and low offset voltage.
Q: What are some typical applications of the TLC27L4ING4? A: The TLC27L4ING4 can be used in sensor amplification, signal conditioning, active filters, data acquisition systems, and precision instrumentation.
Q: What is the supply voltage range for the TLC27L4ING4? A: The TLC27L4ING4 operates from a supply voltage range of 2.7V to 16V.
Q: Can the TLC27L4ING4 operate with a single supply voltage? A: Yes, the TLC27L4ING4 can operate with a single supply voltage as low as 2.7V, making it suitable for battery-powered applications.
Q: What is the input offset voltage of the TLC27L4ING4? A: The input offset voltage is typically very low, around 500µV.
Q: Does the TLC27L4ING4 have rail-to-rail input/output capability? A: Yes, the TLC27L4ING4 has rail-to-rail input/output operation, allowing it to handle signals close to the supply rails.
Q: What is the maximum output current of the TLC27L4ING4? A: The TLC27L4ING4 can deliver a maximum output current of 40mA.
Q: Is the TLC27L4ING4 suitable for precision applications? A: Yes, the TLC27L4ING4 is designed for precision applications due to its low offset voltage and low input bias current.
Q: Can the TLC27L4ING4 be used in harsh environments? A: The TLC27L4ING4 has a wide operating temperature range and is specified for industrial applications, making it suitable for use in harsh environments.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.