Texas Instruments
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
TL16C752BPT
vedi dettagli Schede tecniche

TL16C752BPT

Product Overview

Category

The TL16C752BPT belongs to the category of integrated circuits (ICs) specifically designed for serial communication.

Use

This product is commonly used in various electronic devices that require reliable and efficient serial communication, such as computers, industrial automation systems, and telecommunications equipment.

Characteristics

  • High-performance dual universal asynchronous receiver/transmitter (UART)
  • Supports both RS-232 and RS-485 serial interfaces
  • Low power consumption
  • Wide operating voltage range
  • Robust noise immunity
  • Flexible data formatting options

Package

The TL16C752BPT is available in a compact and industry-standard 48-pin thin quad flat package (TQFP), which ensures easy integration into circuit boards.

Essence

The essence of the TL16C752BPT lies in its ability to facilitate seamless and reliable serial communication between different electronic components within a system.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each reel containing 250 units. Bulk packaging options are also available for larger orders.

Specifications

  • Supply Voltage: 3.3V
  • Data Rate: Up to 1 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of UART Channels: 2
  • FIFO Buffer Size: 16 bytes
  • Supported Serial Interfaces: RS-232, RS-485

Detailed Pin Configuration

The TL16C752BPT features a total of 48 pins, each serving a specific purpose in the overall functionality of the IC. The pin configuration is as follows:

(Pin diagram here)

Functional Features

  1. Dual UART: The TL16C752BPT incorporates two independent UART channels, allowing simultaneous communication on separate serial interfaces.
  2. Auto Flow Control: This feature enables automatic control of data flow between the transmitter and receiver, preventing data loss or buffer overflow.
  3. Programmable Baud Rate Generator: The integrated baud rate generator allows flexible configuration of the data transfer speed to suit various communication requirements.
  4. Interrupt Support: The IC supports interrupt-driven communication, enabling efficient handling of incoming and outgoing data.
  5. Sleep Mode: The TL16C752BPT offers a low-power sleep mode, reducing energy consumption during idle periods.

Advantages and Disadvantages

Advantages

  • High-performance UART with support for multiple serial interfaces
  • Robust noise immunity ensures reliable communication in noisy environments
  • Low power consumption enhances energy efficiency
  • Flexible data formatting options provide compatibility with different protocols

Disadvantages

  • Limited FIFO buffer size may require additional buffering in high-speed applications
  • Higher cost compared to basic UART modules due to advanced features

Working Principles

The TL16C752BPT operates based on the principles of UART communication. It receives parallel data from the system bus, converts it into serial format, and transmits it over the selected serial interface. On the receiving end, it receives serial data, converts it back to parallel format, and transfers it to the system bus.

Detailed Application Field Plans

The TL16C752BPT finds extensive application in various industries, including:

  1. Computer Systems: Used in motherboards, expansion cards, and peripherals to enable serial communication between devices.
  2. Industrial Automation: Employed in programmable logic controllers (PLCs), human-machine interfaces (HMIs), and sensors for reliable data exchange.
  3. Telecommunications: Integrated into networking equipment, modems, and routers to facilitate serial communication between network components.
  4. Automotive Electronics: Utilized in automotive diagnostic tools, infotainment systems, and telematics devices for efficient data transmission.

Detailed and Complete Alternative Models

  1. MAX3232 - A popular alternative offering similar functionality with RS-232 support.
  2. SN65HVD485 - An alternative model specifically designed for RS-485 communication.
  3. SC16C752B - A compatible alternative from a different manufacturer, offering comparable features and performance.

(Note: This is not an exhaustive list of alternative models; further research is recommended.)

In conclusion, the TL16C752BPT is a high-performance UART IC that provides reliable serial communication in various electronic devices. Its advanced features, flexible configuration options, and wide application range make it a preferred choice for designers seeking efficient data transfer capabilities.

10 domande e risposte comuni relative all'applicazione di TL16C752BPT nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of TL16C752BPT in technical solutions:

  1. Q: What is TL16C752BPT? A: TL16C752BPT is a dual UART (Universal Asynchronous Receiver/Transmitter) with 64-byte FIFOs (First-In-First-Out) and integrated RS-232 transceivers.

  2. Q: What are the key features of TL16C752BPT? A: The key features include two independent UART channels, support for data rates up to 3 Mbps, 64-byte transmit/receive FIFOs, and compatibility with RS-232 voltage levels.

  3. Q: How can I interface TL16C752BPT with a microcontroller or processor? A: TL16C752BPT uses a standard UART interface, which can be easily connected to the UART pins of a microcontroller or processor.

  4. Q: Can TL16C752BPT be used in both full-duplex and half-duplex communication modes? A: Yes, TL16C752BPT supports both full-duplex and half-duplex communication modes, allowing simultaneous transmission and reception of data.

  5. Q: What is the maximum data rate supported by TL16C752BPT? A: TL16C752BPT supports data rates up to 3 Mbps, making it suitable for high-speed communication applications.

  6. Q: Does TL16C752BPT require external components for operation? A: Yes, TL16C752BPT requires external crystal oscillators or clock sources for generating the baud rate clocks.

  7. Q: Can TL16C752BPT be used in battery-powered devices? A: Yes, TL16C752BPT has low power consumption and supports power-saving modes, making it suitable for battery-powered devices.

  8. Q: Is TL16C752BPT compatible with both 3.3V and 5V logic levels? A: Yes, TL16C752BPT is compatible with both 3.3V and 5V logic levels, allowing easy integration with different microcontrollers or processors.

  9. Q: Can TL16C752BPT be used in industrial environments? A: Yes, TL16C752BPT has built-in ESD protection and is designed to operate reliably in harsh industrial environments.

  10. Q: Are there any application examples where TL16C752BPT can be used? A: TL16C752BPT can be used in various applications such as industrial automation, embedded systems, point-of-sale terminals, networking equipment, and more.

Please note that these answers are general and may vary depending on the specific requirements and implementation of TL16C752BPT in a technical solution.