TIBPAL16R8-5CN

Product Overview

Category

TIBPAL16R8-5CN belongs to the category of programmable logic devices (PLDs).

Use

This device is commonly used in digital circuits for implementing various logical functions.

Characteristics

• Programmable: The TIBPAL16R8-5CN can be programmed to perform specific logic functions.
• High-speed operation: It operates at a high clock frequency, making it suitable for time-critical applications.
• Low power consumption: The device is designed to minimize power consumption, ensuring efficient operation.
• Versatile: It can be used in a wide range of applications due to its programmability.

Package

The TIBPAL16R8-5CN comes in a 20-pin ceramic dual inline package (DIP).

Essence

The essence of this product lies in its ability to provide a flexible and customizable solution for implementing digital logic functions.

Packaging/Quantity

The TIBPAL16R8-5CN is typically packaged in tubes or trays, with each containing a specified quantity of devices.

Specifications

• Technology: CMOS
• Number of Inputs: 8
• Number of Outputs: 8
• Operating Voltage: 5V
• Maximum Clock Frequency: 25 MHz
• Programming Method: Fuse-link
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

1. GND (Ground)
2. I/O0 (Input/Output 0)
3. I/O1 (Input/Output 1)
4. I/O2 (Input/Output 2)
5. I/O3 (Input/Output 3)
6. I/O4 (Input/Output 4)
7. I/O5 (Input/Output 5)
8. I/O6 (Input/Output 6)
9. I/O7 (Input/Output 7)
10. VCC (Power Supply)
11. /OE (Output Enable)
12. /CE (Chip Enable)
13. A0 (Address 0)
14. A1 (Address 1)
15. A2 (Address 2)
16. A3 (Address 3)
17. A4 (Address 4)
18. A5 (Address 5)
19. /PGM (Program Mode)
20. /RDY (Ready)

Functional Features

• Logic Function Implementation: The TIBPAL16R8-5CN can be programmed to implement a wide range of logic functions, including AND, OR, XOR, and more.
• Output Enable Control: The /OE pin allows for enabling or disabling the outputs, providing flexibility in circuit design.
• Chip Enable Control: The /CE pin enables or disables the device, allowing for power-saving operation when not in use.
• Address Inputs: The address pins (A0-A5) are used to select specific memory locations during programming.

Advantages and Disadvantages

Advantages

• Flexibility: The programmability of the TIBPAL16R8-5CN allows for customization according to specific application requirements.
• High-Speed Operation: The device operates at a high clock frequency, making it suitable for time-critical applications.
• Low Power Consumption: The TIBPAL16R8-5CN is designed to minimize power consumption, ensuring efficient operation.

Disadvantages

• Limited Capacity: The device has a limited number of inputs and outputs, which may restrict its applicability in complex circuits.
• Programming Complexity: Programming the TIBPAL16R8-5CN requires knowledge of hardware description languages or specialized software tools.

Working Principles

The TIBPAL16R8-5CN utilizes a fuse-link programming method. During programming, the desired logic function is defined by blowing specific fuses, which permanently alter the device's internal connections. Once programmed, the device operates based on the configured logic function, responding to input signals and producing corresponding output signals.

Detailed Application Field Plans

The TIBPAL16R8-5CN finds applications in various fields, including: 1. Digital circuit design 2. Microcontroller-based systems 3. Communication systems 4. Industrial automation 5. Automotive electronics

Detailed and Complete Alternative Models

1. TIBPAL16L8-25CN: Similar to TIBPAL16R8-5CN but operates at a higher clock frequency.
2. TIBPAL16R6-15CN: A lower capacity version with 6 inputs/outputs.
3. TIBPAL16R4-10CN: Another lower capacity option with 4 inputs/outputs.

These alternative models provide different capabilities and can be chosen based on specific project requirements.

Word count: 529 words