Texas Instruments
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
SN75HVD3082EDGKR
vedi dettagli Schede tecniche

SN75HVD3082EDGKR

Product Overview

Category

SN75HVD3082EDGKR belongs to the category of integrated circuits (ICs).

Use

It is commonly used in communication systems and networks for transmitting and receiving data signals.

Characteristics

  • High-speed data transmission
  • Low power consumption
  • Robustness against noise and interference
  • Wide operating voltage range

Package

SN75HVD3082EDGKR comes in a small form factor package, such as an 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of SN75HVD3082EDGKR lies in its ability to facilitate reliable and efficient data communication between devices in various applications.

Packaging/Quantity

Typically, SN75HVD3082EDGKR is available in reels or tubes, with a quantity of around 2500 units per reel/tube.

Specifications

  • Operating Voltage Range: 3.3V to 5V
  • Data Rate: Up to 1 Mbps
  • Number of Channels: 1
  • Input/Output Logic Levels: CMOS/TTL compatible
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

SN75HVD3082EDGKR has the following pin configuration:

  1. VCC - Power supply input
  2. GND - Ground reference
  3. RO - Receiver output
  4. DI - Driver input
  5. DE - Driver enable
  6. RE - Receiver enable
  7. RS - Receiver output short-circuit protection
  8. NC - No connection

Functional Features

  • Driver and receiver functions integrated into a single IC
  • Half-duplex communication capability
  • Built-in protection against bus fault conditions
  • Low standby current consumption
  • ESD (Electrostatic Discharge) protection

Advantages and Disadvantages

Advantages

  • High-speed data transmission capability
  • Wide operating voltage range allows compatibility with various systems
  • Robustness against noise and interference ensures reliable communication
  • Integrated protection features enhance system reliability
  • Low power consumption contributes to energy efficiency

Disadvantages

  • Limited to half-duplex communication only
  • Requires additional external components for full functionality in certain applications

Working Principles

SN75HVD3082EDGKR operates based on the principles of differential signaling. It uses a balanced transmission line to transmit data signals, which helps in reducing noise susceptibility and improving signal integrity. The driver section amplifies the transmitted signals, while the receiver section detects and decodes the received signals.

Detailed Application Field Plans

SN75HVD3082EDGKR finds applications in various fields, including:

  1. Industrial automation: Used for communication between sensors, actuators, and control systems.
  2. Automotive electronics: Enables data exchange between different automotive modules, such as engine control units, airbag systems, and infotainment systems.
  3. Telecommunications: Facilitates data transmission in networking equipment, such as routers and switches.
  4. Home automation: Allows communication between smart devices, such as smart thermostats, lighting systems, and security systems.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to SN75HVD3082EDGKR are:

  1. MAX485 - Manufactured by Maxim Integrated
  2. LTC2862 - Manufactured by Linear Technology
  3. SP3485 - Manufactured by Exar Corporation
  4. SN65HVD3082E - Manufactured by Texas Instruments

These alternative models can be considered based on specific application requirements and availability.

(Note: The content provided above is approximately 350 words. Additional information can be added to meet the required word count of 1100 words.)

10 domande e risposte comuni relative all'applicazione di SN75HVD3082EDGKR nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of SN75HVD3082EDGKR in technical solutions:

  1. Q: What is SN75HVD3082EDGKR? A: SN75HVD3082EDGKR is a high-speed CAN transceiver IC (Integrated Circuit) used for communication in automotive and industrial applications.

  2. Q: What is the operating voltage range of SN75HVD3082EDGKR? A: The operating voltage range of SN75HVD3082EDGKR is typically between 3.3V and 5V.

  3. Q: Can SN75HVD3082EDGKR be used in both automotive and industrial applications? A: Yes, SN75HVD3082EDGKR is designed to be used in both automotive and industrial environments.

  4. Q: What is the maximum data rate supported by SN75HVD3082EDGKR? A: SN75HVD3082EDGKR supports a maximum data rate of up to 1 Mbps (megabits per second).

  5. Q: Does SN75HVD3082EDGKR support bus fault protection? A: Yes, SN75HVD3082EDGKR provides bus fault protection, including thermal shutdown and receiver fail-safe features.

  6. Q: Can SN75HVD3082EDGKR be used in a multi-node CAN network? A: Yes, SN75HVD3082EDGKR can be used in a multi-node CAN network, as it supports multiple nodes on a single bus.

  7. Q: What is the typical quiescent current consumption of SN75HVD3082EDGKR? A: The typical quiescent current consumption of SN75HVD3082EDGKR is around 5 mA (milliamperes).

  8. Q: Does SN75HVD3082EDGKR have built-in ESD protection? A: Yes, SN75HVD3082EDGKR has built-in ESD (Electrostatic Discharge) protection to safeguard against electrostatic events.

  9. Q: Can SN75HVD3082EDGKR be used in harsh environments? A: Yes, SN75HVD3082EDGKR is designed to operate reliably in harsh environments, including extended temperature ranges.

  10. Q: What package options are available for SN75HVD3082EDGKR? A: SN75HVD3082EDGKR is available in a small form factor package called VSSOP-8 (Very Small Outline Package).