L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
SN75HVD07DRG4

SN75HVD07DRG4

Product Overview

Category

The SN75HVD07DRG4 belongs to the category of integrated circuits.

Use

It is commonly used as a CAN transceiver in automotive and industrial applications.

Characteristics

  • High-speed data transmission
  • Robustness for harsh environments
  • Low power consumption

Package

The SN75HVD07DRG4 comes in a small outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to facilitate reliable communication in rugged environments.

Packaging/Quantity

The SN75HVD07DRG4 is typically packaged in reels with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage Range: 3 V to 5.5 V
  • Data Rate: Up to 1 Mbps
  • Operating Temperature Range: -40°C to 125°C
  • ESD Protection: ±16 kV HBM

Detailed Pin Configuration

The SN75HVD07DRG4 has an 8-pin SOIC package with the following pin configuration: 1. VCC 2. GND 3. TXD 4. RXD 5. RS 6. VREF 7. CANL 8. CANH

Functional Features

  • Differential signaling for noise immunity
  • Thermal shutdown protection
  • Fail-safe features for bus fault protection

Advantages

  • High data rate capability
  • Wide operating temperature range
  • Enhanced ESD protection

Disadvantages

  • Limited voltage supply range
  • Relatively higher cost compared to some alternatives

Working Principles

The SN75HVD07DRG4 operates by converting the digital signals from the CAN controller into differential signals suitable for transmission over the CAN bus. It also receives incoming differential signals and converts them back into digital signals for the CAN controller.

Detailed Application Field Plans

The SN75HVD07DRG4 is widely used in automotive systems, industrial automation, and other applications requiring robust and reliable communication over a Controller Area Network (CAN).

Detailed and Complete Alternative Models

Some alternative models to the SN75HVD07DRG4 include the MCP2551, TJA1050, and ISO1050. These alternatives offer similar functionality and are compatible with CAN bus systems.

In conclusion, the SN75HVD07DRG4 is a versatile and robust CAN transceiver suitable for demanding applications in automotive and industrial settings. Its high-speed data transmission, robustness, and fail-safe features make it a popular choice for engineers designing reliable communication networks.

[Word count: 366]

10 domande e risposte comuni relative all'applicazione di SN75HVD07DRG4 nelle soluzioni tecniche

  1. What is the SN75HVD07DRG4?

    • The SN75HVD07DRG4 is a half-duplex RS-485 transceiver designed for balanced data transmission over twisted-pair cables.
  2. What is the operating voltage range of SN75HVD07DRG4?

    • The operating voltage range of SN75HVD07DRG4 is 3V to 5.5V, making it suitable for a wide range of applications.
  3. What is the maximum data rate supported by SN75HVD07DRG4?

    • SN75HVD07DRG4 supports data rates up to 250 kbps, making it suitable for various industrial and automotive applications.
  4. What are the typical applications of SN75HVD07DRG4?

    • Typical applications of SN75HVD07DRG4 include industrial automation, HVAC systems, motor control, and automotive networking.
  5. Does SN75HVD07DRG4 have built-in ESD protection?

    • Yes, SN75HVD07DRG4 features ±16-kV HBM ESD protection on the bus pins, enhancing its robustness in harsh environments.
  6. Is SN75HVD07DRG4 compatible with low-power modes?

    • Yes, SN75HVD07DRG4 supports low-power modes, making it suitable for battery-powered applications and energy-efficient designs.
  7. What is the thermal shutdown feature in SN75HVD07DRG4?

    • SN75HVD07DRG4 includes a thermal shutdown feature that protects the device from excessive heat, ensuring reliable operation.
  8. Can SN75HVD07DRG4 be used in automotive applications?

    • Yes, SN75HVD07DRG4 is AEC-Q100 qualified, making it suitable for use in automotive systems where reliability is crucial.
  9. What is the typical quiescent current of SN75HVD07DRG4?

    • The typical quiescent current of SN75HVD07DRG4 is 0.25 mA, contributing to its low-power operation.
  10. Does SN75HVD07DRG4 support fail-safe biasing?

    • Yes, SN75HVD07DRG4 features fail-safe biasing, ensuring a known output state when the bus is in a floating condition.

These questions and answers provide a comprehensive overview of the SN75HVD07DRG4 and its application in technical solutions.