Vedi le specifiche per i dettagli del prodotto.
SN74HC240PW
Product Overview
Category: Integrated Circuit (IC)
Use: The SN74HC240PW is a high-speed octal buffer and line driver with 3-state outputs. It is designed to be used in various digital applications where signal buffering and driving capabilities are required.
Characteristics: - High-speed operation - 3-state outputs for bus-oriented applications - Wide operating voltage range: 2V to 6V - Low power consumption - Schmitt-trigger inputs for noise immunity - ESD protection on all inputs and outputs
Package: TSSOP (Thin Shrink Small Outline Package)
Essence: The SN74HC240PW is an essential component in digital systems that require signal buffering and driving functions. It ensures reliable and efficient data transmission between different parts of the system.
Packaging/Quantity: The SN74HC240PW is typically available in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the supplier.
Specifications
- Supply Voltage Range: 2V to 6V
- Input Voltage Range: 0V to VCC
- Output Voltage Range: 0V to VCC
- Operating Temperature Range: -40°C to +85°C
- Maximum Input Current: ±1mA
- Maximum Output Current: ±6mA
- Propagation Delay Time: 9ns (typical)
- Maximum Power Dissipation: 500mW
Pin Configuration
The SN74HC240PW has a total of 20 pins, which are assigned specific functions as follows:
- A1: Input A1
- Y1: Output Y1
- A2: Input A2
- Y2: Output Y2
- GND: Ground
- A3: Input A3
- Y3: Output Y3
- A4: Input A4
- Y4: Output Y4
- VCC: Supply Voltage
- OE: Output Enable
- Y5: Output Y5
- A5: Input A5
- Y6: Output Y6
- A6: Input A6
- Y7: Output Y7
- A7: Input A7
- Y8: Output Y8
- GND: Ground
- A8: Input A8
Functional Features
- Octal buffer and line driver with 3-state outputs
- Non-inverting outputs
- High-speed operation for efficient data transmission
- Schmitt-trigger inputs for improved noise immunity
- Output enable (OE) pin for controlling the output state
- ESD protection on all inputs and outputs for enhanced reliability
Advantages and Disadvantages
Advantages: - High-speed operation allows for fast data transmission - 3-state outputs enable bus-oriented applications - Wide operating voltage range provides flexibility in different systems - Low power consumption for energy-efficient designs - Schmitt-trigger inputs ensure reliable operation in noisy environments - ESD protection enhances the longevity of the IC
Disadvantages: - May not be suitable for applications requiring higher output current - Limited number of input/output pins (8)
Working Principles
The SN74HC240PW operates as an octal buffer and line driver. It receives digital input signals on its eight input pins (A1 to A8) and amplifies them to drive corresponding output pins (Y1 to Y8). The non-inverting outputs provide a replica of the input signals, ensuring signal integrity.
The output enable (OE) pin controls the output state. When OE is high, the outputs are in a high-impedance state (3-state), allowing multiple devices to share the same bus without interference. When OE is low, the outputs are active and reflect the input signals.
The IC operates within a specified voltage range (2V to 6V) and provides ESD protection on all inputs and outputs, safeguarding against electrostatic discharge events.
Detailed Application Field Plans
The SN74HC240PW finds applications in various digital systems, including but not limited to: - Microcontrollers - Data communication systems - Memory interfaces - Industrial automation - Automotive electronics - Consumer electronics
Its buffering and driving capabilities make it suitable for applications that require signal amplification, noise immunity, and efficient data transmission.
Detailed and Complete Alternative Models
Some alternative models to the SN74HC240PW include: - SN74HCT240: Similar functionality with TTL-level compatible inputs - SN74LS240: Lower power consumption, but slower operation - SN74ACT240: Faster operation with higher output current capability
These alternative models offer different trade-offs in terms of speed, power consumption, and compatibility with other
10 domande e risposte comuni relative all'applicazione di SN74HC240PW nelle soluzioni tecniche
Sure! Here are 10 common questions and answers related to the application of SN74HC240PW in technical solutions:
Q: What is SN74HC240PW? A: SN74HC240PW is a high-speed octal buffer and line driver with 3-state outputs, commonly used in digital logic circuits.
Q: What is the maximum operating voltage for SN74HC240PW? A: The maximum operating voltage for SN74HC240PW is 6 volts.
Q: How many inputs and outputs does SN74HC240PW have? A: SN74HC240PW has 8 inputs and 8 outputs.
Q: Can SN74HC240PW be used as a level shifter? A: Yes, SN74HC240PW can be used as a level shifter to convert signals between different voltage levels.
Q: What is the maximum output current that SN74HC240PW can drive? A: SN74HC240PW can drive up to 35 mA of output current per channel.
Q: Is SN74HC240PW compatible with both TTL and CMOS logic levels? A: Yes, SN74HC240PW is compatible with both TTL and CMOS logic levels.
Q: Can SN74HC240PW be used in bidirectional data transfer applications? A: Yes, SN74HC240PW supports bidirectional data transfer by using its 3-state outputs.
Q: What is the typical propagation delay of SN74HC240PW? A: The typical propagation delay of SN74HC240PW is around 9 ns.
Q: Does SN74HC240PW have built-in protection against electrostatic discharge (ESD)? A: Yes, SN74HC240PW has built-in ESD protection to prevent damage from static electricity.
Q: Can SN74HC240PW be used in automotive applications? A: Yes, SN74HC240PW is suitable for automotive applications as it meets the necessary standards and specifications.
Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.