SN74ALVC245DW

Product Overview

• Category: Integrated Circuit (IC)
• Use: Level shifting and voltage translation
• Characteristics: Bi-directional, 8-bit, non-inverting, voltage-level translator
• Package: SOIC (Small Outline Integrated Circuit)
• Essence: Translates signals between different voltage levels
• Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

• Supply Voltage Range: 1.65V to 3.6V
• High-Level Input Voltage: 2.3V to VCC + 0.5V
• Low-Level Input Voltage: -0.5V to 0.8V
• High-Level Output Voltage: 2.4V to VCC
• Low-Level Output Voltage: 0V to 0.4V
• Maximum Operating Frequency: 400 MHz
• Number of Channels: 8

Detailed Pin Configuration

The SN74ALVC245DW has a total of 20 pins, which are arranged as follows:

1. OE (Output Enable) - Active low output enable input
2. A1 - Data input/output pin 1
3. B1 - Data input/output pin 2
4. A2 - Data input/output pin 3
5. B2 - Data input/output pin 4
6. A3 - Data input/output pin 5
7. B3 - Data input/output pin 6
8. A4 - Data input/output pin 7
9. B4 - Data input/output pin 8
10. GND (Ground) - Ground reference
11. B5 - Data input/output pin 9
12. A5 - Data input/output pin 10
13. B6 - Data input/output pin 11
14. A6 - Data input/output pin 12
15. B7 - Data input/output pin 13
16. A7 - Data input/output pin 14
17. B8 - Data input/output pin 15
18. A8 - Data input/output pin 16
19. VCC - Power supply voltage
20. DIR (Direction Control) - Direction control input

Functional Features

• Bi-directional voltage-level translation between two different voltage domains
• Non-inverting translation, preserving the logic state of the input signals
• Wide supply voltage range allows compatibility with various systems
• High-speed operation, suitable for applications requiring fast signal translation
• Output enable input for easy control of the direction and flow of data

Advantages and Disadvantages

Advantages: - Allows seamless integration of components operating at different voltage levels - Non-inverting translation ensures accurate signal representation - Wide supply voltage range provides flexibility in system design - High-speed operation enables efficient data transfer

Disadvantages: - Limited to 8-bit data translation - Requires careful consideration of voltage level compatibility to avoid signal distortion

Working Principles

The SN74ALVC245DW is a bidirectional voltage-level translator that facilitates communication between two systems operating at different voltage levels. It utilizes a combination of MOSFETs and CMOS technology to achieve non-inverting translation. The direction of data flow is controlled by the DIR pin, while the OE pin enables or disables the output.

When the DIR pin is set to a logic high, the data flows from the A-side to the B-side. Conversely, when the DIR pin is set to a logic low, the data flows from the B-side to the A-side. The OE pin, when active low, enables the outputs, allowing data transmission.

Detailed Application Field Plans

The SN74ALVC245DW finds application in various scenarios where voltage-level translation is required. Some common application fields include:

1. Microcontroller interfacing: It enables communication between microcontrollers operating at different voltage levels.
2. Mixed-voltage systems: It facilitates data transfer between subsystems with varying voltage requirements.
3. Sensor networks: It allows integration of sensors operating at different voltage levels into a single network.
4. Industrial automation: It enables communication between control systems and peripheral devices with different voltage specifications.

Detailed and Complete Alternative Models

1. TXB0108PWR: 8-bit bidirectional voltage-level translator with automatic direction sensing.
2. PCA9306DCTR: Dual bidirectional I2C-bus and SMBus voltage-level translator.
3. SN74LVC4245APW: Octal bus transceiver and voltage-level shifter.

These alternative models offer similar functionality and can be considered as alternatives to the SN74ALVC245DW based on specific application requirements.

Word count: 536 words