The SN74ACT74PWRG4 is a dual D-type positive-edge-triggered flip-flop integrated circuit. It operates at high speed while consuming low power. The device comes in a TSSOP package, which provides a compact and reliable solution for various applications.
The SN74ACT74PWRG4 has a total of 14 pins, each serving a specific function. Here is the detailed pin configuration:
The SN74ACT74PWRG4 is designed to provide reliable and efficient flip-flop functionality. Its positive-edge-triggered design ensures that the outputs change only when a rising edge is detected on the clock input. The device also includes clear and preset inputs, allowing for additional control over the flip-flop operation.
Advantages: - High-speed operation - Low power consumption - Compact TSSOP package - Dual flip-flop configuration
Disadvantages: - Limited number of flip-flops in a single package - Requires external components for complete circuit implementation
The SN74ACT74PWRG4 operates based on the principles of positive-edge-triggered flip-flops. When a rising edge is detected on the clock input, the data from the D1 and D2 inputs are latched into their respective flip-flops. The outputs (Q1 and Q2) reflect the state of the inputs at the time of the clock edge. The clear and preset inputs allow for additional control over the output states.
The SN74ACT74PWRG4 can be used in various applications where flip-flop functionality is required. Some potential application fields include:
These alternative models offer similar functionality to the SN74ACT74PWRG4 and can be considered as replacements based on specific requirements.
In conclusion, the SN74ACT74PWRG4 is a high-speed, low-power dual D-type positive-edge-triggered flip-flop integrated circuit. Its compact TSSOP package and versatile functionality make it suitable for various applications in digital logic circuits, counters, registers, data synchronization, and memory units.
Sure! Here are 10 common questions and answers related to the application of SN74ACT74PWRG4 in technical solutions:
Q: What is SN74ACT74PWRG4? A: SN74ACT74PWRG4 is a dual D-type flip-flop integrated circuit (IC) that can store one bit of data.
Q: What is the operating voltage range for SN74ACT74PWRG4? A: The operating voltage range for SN74ACT74PWRG4 is typically between 4.5V and 5.5V.
Q: What is the maximum clock frequency supported by SN74ACT74PWRG4? A: SN74ACT74PWRG4 can support clock frequencies up to 100 MHz.
Q: Can SN74ACT74PWRG4 be used in both digital and analog circuits? A: No, SN74ACT74PWRG4 is specifically designed for digital circuits and is not suitable for analog applications.
Q: How many flip-flops are there in SN74ACT74PWRG4? A: SN74ACT74PWRG4 contains two independent D-type flip-flops.
Q: What is the typical propagation delay of SN74ACT74PWRG4? A: The typical propagation delay of SN74ACT74PWRG4 is around 7.5 ns.
Q: Can SN74ACT74PWRG4 be cascaded to create larger counters or shift registers? A: Yes, multiple SN74ACT74PWRG4 ICs can be cascaded together to create larger counters or shift registers.
Q: Does SN74ACT74PWRG4 have any built-in clock synchronization features? A: No, SN74ACT74PWRG4 does not have any built-in clock synchronization features. External synchronization may be required.
Q: What is the power supply current consumption of SN74ACT74PWRG4? A: The power supply current consumption of SN74ACT74PWRG4 is typically around 8 mA.
Q: Can SN74ACT74PWRG4 operate in harsh environments with high temperatures? A: Yes, SN74ACT74PWRG4 has a wide operating temperature range of -40°C to 85°C and can withstand harsh environments.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.