Texas Instruments
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
LMV321IDBVTE4
vedi dettagli Schede tecniche

LMV321IDBVTE4

Product Overview

Category: Integrated Circuit (IC)

Use: Operational Amplifier

Characteristics: - Low voltage, low power consumption - Rail-to-rail input and output - Single supply operation - Wide bandwidth - High slew rate

Package: SOT-23-5

Essence: The LMV321IDBVTE4 is a single operational amplifier designed for low voltage applications. It offers rail-to-rail input and output capabilities, making it suitable for use in various electronic circuits.

Packaging/Quantity: The LMV321IDBVTE4 is available in a SOT-23-5 package. Each package contains one unit of the IC.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Offset Voltage: ±1mV
  • Input Bias Current: 0.2pA
  • Gain Bandwidth Product: 1MHz
  • Slew Rate: 0.6V/µs
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LMV321IDBVTE4 has a total of five pins:

  1. V+ (Positive Power Supply)
  2. V- (Negative Power Supply)
  3. IN- (Inverting Input)
  4. IN+ (Non-Inverting Input)
  5. OUT (Output)

Functional Features

  • Low voltage operation allows for compatibility with battery-powered devices.
  • Rail-to-rail input and output capability enables maximum utilization of the available voltage range.
  • Single supply operation simplifies circuit design and reduces component count.
  • Wide bandwidth ensures accurate signal amplification across a range of frequencies.
  • High slew rate enables fast response to input signal changes.

Advantages and Disadvantages

Advantages: - Low power consumption - Small package size - Wide operating temperature range - Rail-to-rail input and output

Disadvantages: - Limited gain bandwidth product compared to some other operational amplifiers - Higher input offset voltage compared to precision amplifiers

Working Principles

The LMV321IDBVTE4 is an operational amplifier that amplifies the difference between its two input voltages. It operates on a single supply voltage and provides a high gain, making it suitable for various applications such as signal conditioning, filtering, and amplification.

Detailed Application Field Plans

The LMV321IDBVTE4 can be used in a wide range of applications, including but not limited to: - Portable audio devices - Sensor interfaces - Battery-powered systems - Signal conditioning circuits - Active filters - Instrumentation amplifiers

Detailed and Complete Alternative Models

  1. LMV358IDBVR: Dual operational amplifier with similar characteristics and package.
  2. LMV324IDR: Quad operational amplifier with similar characteristics and package.
  3. TLV2462IDR: Precision operational amplifier with lower input offset voltage and higher gain bandwidth product.

These alternative models offer different configurations and performance specifications, allowing designers to choose the most suitable option for their specific application requirements.

Word count: 399 words

10 domande e risposte comuni relative all'applicazione di LMV321IDBVTE4 nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of LMV321IDBVTE4 in technical solutions:

  1. Q: What is LMV321IDBVTE4? A: LMV321IDBVTE4 is a low-power, single operational amplifier (op-amp) designed for general-purpose applications.

  2. Q: What is the supply voltage range for LMV321IDBVTE4? A: The supply voltage range for LMV321IDBVTE4 is typically between 2.7V and 5.5V.

  3. Q: What is the input offset voltage of LMV321IDBVTE4? A: The input offset voltage of LMV321IDBVTE4 is typically around 1mV.

  4. Q: Can LMV321IDBVTE4 operate at high temperatures? A: Yes, LMV321IDBVTE4 has a wide temperature range and can operate reliably at temperatures up to 125°C.

  5. Q: What is the typical gain bandwidth product of LMV321IDBVTE4? A: The typical gain bandwidth product of LMV321IDBVTE4 is around 1 MHz.

  6. Q: Is LMV321IDBVTE4 suitable for battery-powered applications? A: Yes, LMV321IDBVTE4 is designed for low-power applications and is well-suited for battery-powered devices.

  7. Q: Can LMV321IDBVTE4 be used as a comparator? A: While LMV321IDBVTE4 is primarily an op-amp, it can also be used as a comparator in certain applications.

  8. Q: What is the input common-mode voltage range of LMV321IDBVTE4? A: The input common-mode voltage range of LMV321IDBVTE4 typically extends from the negative supply voltage to within 1.5V of the positive supply voltage.

  9. Q: Can LMV321IDBVTE4 drive capacitive loads? A: Yes, LMV321IDBVTE4 has a high output current capability and can drive capacitive loads up to a certain limit.

  10. Q: What are some typical applications for LMV321IDBVTE4? A: LMV321IDBVTE4 is commonly used in audio amplifiers, sensor interfaces, battery-powered devices, and other low-power applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.