Texas Instruments
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
BQ294624DRVT
vedi dettagli Schede tecniche

BQ294624DRVT - English Editing Encyclopedia Entry

Product Overview

Category

BQ294624DRVT belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used for battery protection in various electronic devices.

Characteristics

  • BQ294624DRVT is a high-performance, low-power voltage detector.
  • It offers accurate monitoring and protection for lithium-ion/polymer battery packs.
  • The IC provides overvoltage, undervoltage, and short-circuit protection.
  • It features a wide operating voltage range and low quiescent current consumption.
  • BQ294624DRVT is designed to ensure safe and reliable operation of battery-powered systems.

Package

The BQ294624DRVT IC is available in a small outline package (SOT-23) with three pins.

Essence

The essence of BQ294624DRVT lies in its ability to safeguard battery packs by detecting and preventing potentially harmful voltage conditions.

Packaging/Quantity

The IC is typically sold in reels or tubes, with each reel/tube containing a specific quantity of BQ294624DRVT units. The exact quantity may vary depending on the supplier.

Specifications

  • Operating Voltage Range: 2.5V to 28V
  • Quiescent Current: 10µA (typical)
  • Overvoltage Threshold: Adjustable from 2.5V to 5.5V
  • Undervoltage Threshold: Adjustable from 1.8V to 4.6V
  • Short-Circuit Detection Threshold: 50mV (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The BQ294624DRVT IC has three pins:

  1. VDD: Power supply input pin (+2.5V to +28V).
  2. GND: Ground reference pin.
  3. VOUT: Output pin that provides a logic-level signal indicating the battery's voltage status.

Functional Features

  1. Overvoltage Protection: Monitors the battery voltage and triggers an alert or disconnects the load when the voltage exceeds the set threshold.
  2. Undervoltage Protection: Detects low battery voltage and initiates appropriate actions to prevent damage to the battery or connected devices.
  3. Short-Circuit Protection: Detects excessive current flow due to a short circuit and shuts down the system to avoid further damage.
  4. Adjustable Thresholds: Allows customization of overvoltage and undervoltage thresholds to suit specific application requirements.
  5. Low Quiescent Current: Ensures minimal power consumption during normal operation, prolonging battery life.

Advantages and Disadvantages

Advantages

  • Provides comprehensive protection for lithium-ion/polymer battery packs.
  • Wide operating voltage range enables compatibility with various battery configurations.
  • Customizable thresholds offer flexibility in different applications.
  • Low quiescent current minimizes power consumption.

Disadvantages

  • Limited to battery protection applications and not suitable for other purposes.
  • Requires careful configuration to ensure optimal performance.

Working Principles

BQ294624DRVT operates by continuously monitoring the battery voltage using an internal voltage reference. It compares the measured voltage against the user-configured thresholds for overvoltage and undervoltage conditions. When a threshold is exceeded, the IC triggers the appropriate protection mechanism, such as activating an alert or disconnecting the load. The short-circuit protection feature detects excessive current flow and promptly shuts down the system to prevent damage.

Detailed Application Field Plans

BQ294624DRVT finds extensive use in various battery-powered systems, including but not limited to: - Portable electronic devices (e.g., smartphones, tablets) - Laptop computers - Electric vehicles - Uninterruptible power supplies (UPS) - Solar power systems - Industrial equipment

Detailed and Complete Alternative Models

  1. BQ294625DRVT: Similar to BQ294624DRVT, but with additional features for enhanced battery protection.
  2. BQ294626DRVT: A higher-performance variant with extended operating temperature range and improved accuracy.
  3. BQ294627DRVT: Designed specifically for automotive applications, offering robust protection for vehicle battery packs.

These alternative models provide similar functionality to BQ294624DRVT while catering to specific requirements in different applications.

Word count: 579 words

10 domande e risposte comuni relative all'applicazione di BQ294624DRVT nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of BQ294624DRVT in technical solutions:

  1. Question: What is the purpose of BQ294624DRVT?
    Answer: BQ294624DRVT is a voltage protection device used to monitor and protect lithium-ion battery packs from overcharging, over-discharging, and overcurrent conditions.

  2. Question: What is the maximum voltage rating of BQ294624DRVT?
    Answer: The maximum voltage rating of BQ294624DRVT is typically around 28 volts.

  3. Question: How does BQ294624DRVT detect overvoltage conditions?
    Answer: BQ294624DRVT monitors the voltage across the battery pack and triggers an alert or shuts down the system if the voltage exceeds a pre-set threshold.

  4. Question: Can BQ294624DRVT handle high current applications?
    Answer: Yes, BQ294624DRVT has a built-in overcurrent detection feature that can handle high current applications and protect the battery pack from excessive current flow.

  5. Question: Is BQ294624DRVT suitable for automotive applications?
    Answer: Yes, BQ294624DRVT is commonly used in automotive applications to protect the battery pack from various electrical faults.

  6. Question: Does BQ294624DRVT have temperature monitoring capabilities?
    Answer: Yes, BQ294624DRVT includes a temperature sensor that can monitor the battery pack's temperature and trigger appropriate actions if it exceeds safe limits.

  7. Question: Can BQ294624DRVT be used with different battery chemistries?
    Answer: BQ294624DRVT is specifically designed for lithium-ion battery packs and may not be suitable for other battery chemistries.

  8. Question: How does BQ294624DRVT protect against over-discharge?
    Answer: BQ294624DRVT monitors the battery pack's voltage and triggers an alert or shuts down the system if the voltage drops below a pre-set threshold, preventing over-discharge.

  9. Question: Can BQ294624DRVT be used in multi-cell battery packs?
    Answer: Yes, BQ294624DRVT can be used in multi-cell battery packs by connecting it to each cell in the pack.

  10. Question: Are there any specific design considerations when using BQ294624DRVT?
    Answer: It is important to ensure proper thermal management, accurate voltage calibration, and appropriate circuit protection when designing with BQ294624DRVT to maximize its effectiveness and reliability.