Texas Instruments
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
74ALVCHR16269ALRG4
vedi dettagli Schede tecniche

Encyclopedia Entry: 74ALVCHR16269ALRG4

Product Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Level Translator
  • Characteristics: High-speed, low-power consumption
  • Package: 56-pin VQFN package
  • Essence: Translates logic levels between different voltage domains
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Logic Family: ALVCH
  • Number of Channels: 16
  • Input Voltage Range: 1.2V to 3.6V
  • Output Voltage Range: 1.65V to 5.5V
  • Propagation Delay: 2.5ns (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 74ALVCHR16269ALRG4 IC has a total of 56 pins. The pin configuration is as follows:

  1. A1
  2. B1
  3. Y1
  4. GND
  5. A2
  6. B2
  7. Y2
  8. GND
  9. A3
  10. B3
  11. Y3
  12. GND
  13. A4
  14. B4
  15. Y4
  16. GND
  17. A5
  18. B5
  19. Y5
  20. GND
  21. A6
  22. B6
  23. Y6
  24. GND
  25. A7
  26. B7
  27. Y7
  28. GND
  29. A8
  30. B8
  31. Y8
  32. GND
  33. A9
  34. B9
  35. Y9
  36. GND
  37. A10
  38. B10
  39. Y10
  40. GND
  41. A11
  42. B11
  43. Y11
  44. GND
  45. A12
  46. B12
  47. Y12
  48. GND
  49. VCCA
  50. VCCB
  51. OEAB
  52. OEB
  53. VREF
  54. VCCY
  55. OEBA
  56. GND

Functional Features

  • Translates logic levels between different voltage domains
  • Supports bidirectional data flow
  • Provides voltage level shifting for high-speed communication
  • Low power consumption
  • Schmitt-trigger inputs for noise immunity

Advantages and Disadvantages

Advantages: - High-speed operation - Wide input and output voltage range - Bidirectional translation capability - Low power consumption - Noise-immune design

Disadvantages: - Limited number of channels (16) - Requires careful consideration of voltage compatibility

Working Principles

The 74ALVCHR16269ALRG4 is a logic level translator IC designed to enable communication between devices operating at different voltage levels. It utilizes a combination of voltage level shifters and bidirectional buffers to ensure seamless data transfer.

The IC features separate power supply pins (VCCA and VCCB) for the input and output sides, allowing it to interface between voltage domains with different power supplies. The OEAB and OEBA pins control the direction of data flow, enabling bidirectional communication.

When an input signal is applied to one side of the IC, it undergoes level shifting to match the voltage requirements of the other side. The translated signal is then available at the corresponding output pin.

Detailed Application Field Plans

The 74ALVCHR16269ALRG4 is commonly used in various applications where logic level translation is required. Some of the typical application fields include:

  1. Microcontroller interfacing with different voltage peripherals
  2. Communication interfaces between devices operating at different voltage levels
  3. Battery-powered systems requiring efficient voltage level shifting
  4. Industrial automation and control systems
  5. Consumer electronics, such as smartphones and tablets

Detailed and Complete Alternative Models

  • 74ALVC16269A: Similar functionality with a different package (TSSOP)
  • SN74LVC16269A: Equivalent IC from Texas Instruments
  • MC74VHC16269A: Alternative model with higher voltage compatibility

Note: This list is not exhaustive, and there may be other alternative models available in the market.

Word Count: 511 words

10 domande e risposte comuni relative all'applicazione di 74ALVCHR16269ALRG4 nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of 74ALVCHR16269ALRG4 in technical solutions:

  1. Q: What is the function of the 74ALVCHR16269ALRG4? A: The 74ALVCHR16269ALRG4 is a 12-bit universal bus transceiver with 3-state outputs. It can be used for bidirectional data transfer between two buses.

  2. Q: What is the operating voltage range of the 74ALVCHR16269ALRG4? A: The operating voltage range of the 74ALVCHR16269ALRG4 is typically between 1.65V and 3.6V.

  3. Q: Can the 74ALVCHR16269ALRG4 handle high-speed data transfers? A: Yes, the 74ALVCHR16269ALRG4 is designed to support high-speed data transfers up to 400 Mbps.

  4. Q: How many channels does the 74ALVCHR16269ALRG4 have? A: The 74ALVCHR16269ALRG4 has 12 bidirectional channels, allowing for simultaneous data transfer on multiple lines.

  5. Q: Does the 74ALVCHR16269ALRG4 support hot insertion and removal of devices? A: Yes, the 74ALVCHR16269ALRG4 is designed to support hot insertion and removal of devices without causing damage to the IC.

  6. Q: Can the 74ALVCHR16269ALRG4 operate in a noisy environment? A: Yes, the 74ALVCHR16269ALRG4 has built-in noise filtering capabilities to ensure reliable data transmission in noisy environments.

  7. Q: What is the power consumption of the 74ALVCHR16269ALRG4? A: The power consumption of the 74ALVCHR16269ALRG4 is typically low, making it suitable for battery-powered applications.

  8. Q: Can the 74ALVCHR16269ALRG4 be used in both parallel and serial communication systems? A: Yes, the 74ALVCHR16269ALRG4 can be used in both parallel and serial communication systems, providing flexibility in system design.

  9. Q: Does the 74ALVCHR16269ALRG4 have built-in ESD protection? A: Yes, the 74ALVCHR16269ALRG4 has built-in ESD protection to safeguard against electrostatic discharge events.

  10. Q: What package options are available for the 74ALVCHR16269ALRG4? A: The 74ALVCHR16269ALRG4 is available in various package options, such as TSSOP and TVSOP, to suit different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of the 74ALVCHR16269ALRG4.