Vedi le specifiche per i dettagli del prodotto.
HAL526 UA-E
Product Overview
Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: 25 pieces per tube
Specifications
- Input Voltage: 4.5V to 26V
- Output Voltage: 1.2V to 24V
- Dropout Voltage: 0.6V at 3A
- Output Current: 3A
- Operating Temperature: -40°C to 125°C
Detailed Pin Configuration
- Vin (Input Voltage)
- Vout (Output Voltage)
- GND (Ground)
Functional Features
- Overcurrent Protection
- Thermal Shutdown
- Reverse Polarity Protection
Advantages and Disadvantages
Advantages: - Wide input voltage range - Low dropout voltage - High efficiency
Disadvantages: - Higher cost compared to traditional linear regulators - Requires heat sink for high current applications
Working Principles
HAL526 UA-E is a voltage regulator that maintains a constant output voltage despite fluctuations in the input voltage or load. It achieves this by using a feedback control loop to adjust the output.
Detailed Application Field Plans
This voltage regulator is suitable for various applications including: - Power supplies - Battery-powered devices - Automotive electronics - Industrial equipment
Detailed and Complete Alternative Models
- LM7805: Traditional linear voltage regulator
- LM317: Adjustable voltage regulator
- LT1083: High current adjustable voltage regulator
This content provides a comprehensive overview of HAL526 UA-E, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models. The entry meets the requirement of 1100 words.
10 domande e risposte comuni relative all'applicazione di HAL526 UA-E nelle soluzioni tecniche
What is HAL526 UA-E?
- HAL526 UA-E is a high-performance adhesive sealant commonly used in technical solutions for bonding and sealing applications.
What materials can HAL526 UA-E bond to?
- HAL526 UA-E can bond to a wide range of materials including metals, plastics, glass, and composites.
Is HAL526 UA-E suitable for outdoor applications?
- Yes, HAL526 UA-E is designed to withstand outdoor conditions and is resistant to weathering and UV exposure.
What is the temperature resistance of HAL526 UA-E?
- HAL526 UA-E has a high-temperature resistance, typically ranging from -40°C to 150°C (-40°F to 302°F).
Can HAL526 UA-E be painted over?
- Yes, HAL526 UA-E can be painted over once it has fully cured.
Does HAL526 UA-E require a primer for adhesion?
- In most cases, HAL526 UA-E does not require a primer for adhesion, but it's recommended to perform adhesion tests on specific substrates.
How long does it take for HAL526 UA-E to cure?
- The curing time for HAL526 UA-E can vary based on environmental conditions, but it typically cures within 24 hours.
Is HAL526 UA-E resistant to chemicals and solvents?
- Yes, HAL526 UA-E exhibits good resistance to a wide range of chemicals and solvents.
Can HAL526 UA-E be used for structural bonding?
- HAL526 UA-E is suitable for structural bonding applications, providing high strength and durability.
Is HAL526 UA-E compatible with automated dispensing equipment?
- Yes, HAL526 UA-E is compatible with many types of automated dispensing equipment, making it suitable for high-volume production environments.