TDK-Micronas GmbH
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
HAL504 UA-K
vedi dettagli Schede tecniche

HAL504 UA-K

Product Overview

Category: Integrated Circuit
Use: Signal Processing
Characteristics: Low power consumption, high precision
Package: DIP-8
Essence: Analog Comparator
Packaging/Quantity: 50 pieces per tube

Specifications

  • Supply Voltage: 2V to 36V
  • Input Offset Voltage: 5mV
  • Response Time: 1μs
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. Non-Inverting Input (+)
  2. Inverting Input (-)
  3. Output
  4. Ground
  5. Not Connected
  6. Not Connected
  7. VCC+
  8. VCC-

Functional Features

  • High-speed response
  • Wide operating voltage range
  • Low input offset voltage
  • Low power consumption

Advantages and Disadvantages

Advantages: - High precision - Versatile application - Low power consumption

Disadvantages: - Limited output current - Sensitivity to noise

Working Principles

The HAL504 UA-K is an analog comparator that compares the voltages at its non-inverting and inverting inputs and produces a high or low output based on the comparison result. It operates by amplifying the voltage difference between the inputs and driving the output to the supply rails.

Detailed Application Field Plans

The HAL504 UA-K is commonly used in applications requiring precise voltage comparisons, such as: - Battery monitoring systems - Overvoltage/undervoltage protection circuits - Signal conditioning circuits

Detailed and Complete Alternative Models

  1. LM393
  2. LM311
  3. MAX902

In conclusion, the HAL504 UA-K is a versatile integrated circuit with high precision and low power consumption, making it suitable for various signal processing applications.

Word count: 270

10 domande e risposte comuni relative all'applicazione di HAL504 UA-K nelle soluzioni tecniche

  1. What is HAL504 UA-K?

    • HAL504 UA-K is a high-performance adhesive sealant designed for use in technical solutions requiring strong bonding and sealing properties.

  2. What materials can HAL504 UA-K adhere to?

    • HAL504 UA-K can adhere to a wide range of materials including metals, plastics, glass, and composites.

  3. Is HAL504 UA-K suitable for outdoor applications?

    • Yes, HAL504 UA-K is designed to withstand outdoor conditions and is resistant to weathering, UV exposure, and temperature fluctuations.

  4. Can HAL504 UA-K be painted over?

    • Yes, HAL504 UA-K can be painted over once it has fully cured.

  5. What is the recommended application temperature for HAL504 UA-K?

    • The recommended application temperature for HAL504 UA-K is between 5°C to 40°C (41°F to 104°F).

  6. Does HAL504 UA-K have good chemical resistance?

    • Yes, HAL504 UA-K exhibits good resistance to chemicals such as oils, fuels, and solvents.

  7. How long does it take for HAL504 UA-K to cure?

    • HAL504 UA-K typically cures within 24 hours, depending on environmental conditions and the thickness of the applied layer.

  8. Can HAL504 UA-K be used for structural bonding?

    • Yes, HAL504 UA-K is suitable for structural bonding applications where a strong and durable bond is required.

  9. Is HAL504 UA-K compatible with automotive applications?

    • Yes, HAL504 UA-K is commonly used in automotive assembly and repair due to its excellent adhesion and sealing properties.

  10. What are the storage requirements for HAL504 UA-K?

    • HAL504 UA-K should be stored in a cool, dry place away from direct sunlight and sources of heat to maintain its shelf life and performance.