TDK Corporation
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
NTCG063JF103JTB
vedi dettagli Schede tecniche

NTCG063JF103JTB

Product Overview

Category: Passive Components
Use: Temperature Sensor
Characteristics: High precision, small size, low power consumption
Package: SMD (Surface Mount Device)
Essence: Thermistor
Packaging/Quantity: Reel of 3000 pieces

Specifications

  • Resistance: 10kΩ
  • Tolerance: ±5%
  • Operating Temperature Range: -40°C to 125°C
  • Maximum Power Rating: 50mW

Detailed Pin Configuration

  1. Pin 1: Not connected
  2. Pin 2: Thermistor terminal 1
  3. Pin 3: Thermistor terminal 2

Functional Features

  • Accurate temperature measurement
  • Small form factor for space-constrained applications
  • Low power consumption

Advantages and Disadvantages

Advantages: - High precision temperature sensing
- Small size allows for versatile integration
- Low power consumption is ideal for battery-powered devices

Disadvantages: - Limited operating temperature range compared to some alternatives
- Tolerance of ±5% may not be suitable for ultra-precise applications

Working Principles

The NTCG063JF103JTB operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This change in resistance is used to accurately measure the temperature of the surrounding environment.

Detailed Application Field Plans

This thermistor is suitable for a wide range of temperature sensing applications, including: - Consumer electronics - Automotive systems - Industrial equipment - Medical devices

Detailed and Complete Alternative Models

  1. NTCLE100E3103JB0: Similar 10kΩ NTC thermistor with tighter tolerance of ±3%
  2. NTCG063JF104FT1: 100kΩ NTC thermistor for different temperature range requirements

Note: The alternative models listed are for reference and may require specific evaluation for suitability.

This entry provides comprehensive information about the NTCG063JF103JTB thermistor, covering its product details, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

10 domande e risposte comuni relative all'applicazione di NTCG063JF103JTB nelle soluzioni tecniche

  1. What is the NTCG063JF103JTB?

    • The NTCG063JF103JTB is a type of NTC thermistor, which is a temperature-sensitive resistor that decreases in resistance as its temperature increases.

  2. What are the typical applications of NTCG063JF103JTB?

    • The NTCG063JF103JTB is commonly used in temperature sensing and compensation, inrush current limiting, and temperature control in various electronic devices and systems.

  3. What is the resistance value of NTCG063JF103JTB at room temperature?

    • The NTCG063JF103JTB has a resistance value of 10k ohms at room temperature (25°C).

  4. How does NTCG063JF103JTB behave in different temperature environments?

    • The NTCG063JF103JTB exhibits a negative temperature coefficient, meaning its resistance decreases as the temperature rises, making it suitable for temperature measurement and control.

  5. What is the operating temperature range of NTCG063JF103JTB?

    • The NTCG063JF103JTB typically operates within a temperature range of -40°C to 125°C, making it suitable for a wide variety of environmental conditions.

  6. Can NTCG063JF103JTB be used for overcurrent protection?

    • Yes, the NTCG063JF103JTB can be utilized for overcurrent protection due to its property of increasing resistance when subjected to high currents, limiting the inrush current.

  7. Is NTCG063JF103JTB suitable for battery temperature monitoring?

    • Yes, the NTCG063JF103JTB is commonly employed in battery temperature monitoring systems due to its accuracy and reliability in measuring temperature changes.

  8. What are the key considerations when integrating NTCG063JF103JTB into a circuit?

    • When integrating NTCG063JF103JTB, it's important to consider its thermal response, self-heating effects, and calibration to ensure accurate temperature measurements.

  9. Are there any specific soldering or mounting requirements for NTCG063JF103JTB?

    • NTCG063JF103JTB should be soldered using appropriate techniques to avoid damaging the component, and proper mounting methods should be followed to ensure good thermal contact with the measured object.

  10. Can NTCG063JF103JTB be used in automotive applications?

    • Yes, the NTCG063JF103JTB is suitable for automotive applications such as temperature sensing in engine management systems, climate control, and battery management due to its robustness and temperature sensitivity.