Category: Integrated Circuit (IC)
Use: Shift Register
Characteristics: - Serial-in, parallel-out shift register - 8-bit storage register with 3-state outputs - High-speed operation - Wide supply voltage range: 3V to 18V - Low power consumption - Schmitt trigger inputs for noise immunity - Direct interface with TTL levels - Output capability: standard
Package: SO-16 (Small Outline Package)
Essence: The HCF4094M013TR is a versatile shift register IC that allows serial data input and parallel data output. It is commonly used in applications where multiple bits of data need to be shifted and stored simultaneously.
Packaging/Quantity: The HCF4094M013TR is typically sold in reels or tubes, with 2500 units per reel/tube.
The HCF4094M013TR has a total of 16 pins arranged as follows:
+-----+
Q1 |1 16| VDD
Q2 |2 15| Q0
Q3 |3 14| SER
Q4 |4 13| RCLK
Q5 |5 12| SRCLK
Q6 |6 11| OE
Q7 |7 10| STCP
GND |8 9| Q7'
+-----+
Advantages: - High-speed operation allows for efficient data transfer. - Wide supply voltage range makes it compatible with various systems. - Low power consumption helps in energy-efficient designs. - Schmitt trigger inputs ensure reliable operation in noisy environments. - Direct interface with TTL levels simplifies integration.
Disadvantages: - Limited output current may not be suitable for driving high-power loads. - The SO-16 package may require additional space compared to smaller packages.
The HCF4094M013TR is a serial-in, parallel-out shift register. It receives data serially through the SER pin and shifts it internally based on the clock input (SRCLK). The shifted data is then latched into the storage register by the Register Clock (RCLK) signal. The parallel data can be accessed simultaneously from the Q0-Q7 pins.
The HCF4094M013TR is widely used in various applications, including:
Some alternative models to the HCF4094M013TR include:
These alternative models can be considered based on specific requirements and availability.
Word count: 527 words
Sure! Here are 10 common questions and answers related to the application of HCF4094M013TR in technical solutions:
Q: What is the HCF4094M013TR? A: The HCF4094M013TR is a shift register with an output latch, commonly used in digital circuits for data storage and transfer.
Q: What is the maximum clock frequency supported by HCF4094M013TR? A: The HCF4094M013TR can support clock frequencies up to 25 MHz.
Q: How many bits can the HCF4094M013TR store? A: The HCF4094M013TR can store 8 bits of data.
Q: Can I cascade multiple HCF4094M013TR chips together? A: Yes, you can cascade multiple HCF4094M013TR chips to increase the number of bits that can be stored.
Q: What is the power supply voltage range for HCF4094M013TR? A: The HCF4094M013TR operates on a power supply voltage range of 2V to 6V.
Q: Does HCF4094M013TR have any built-in protection features? A: Yes, the HCF4094M013TR has built-in protection against electrostatic discharge (ESD) and excessive power dissipation.
Q: Can HCF4094M013TR be used in both parallel and serial data transfer modes? A: Yes, the HCF4094M013TR supports both parallel and serial data transfer modes, making it versatile for various applications.
Q: What is the typical output current capability of HCF4094M013TR? A: The HCF4094M013TR has a typical output current capability of 6 mA.
Q: Does HCF4094M013TR have any temperature limitations? A: The HCF4094M013TR can operate within a temperature range of -40°C to +125°C.
Q: Are there any application examples for HCF4094M013TR? A: Yes, some common applications of HCF4094M013TR include LED displays, shift registers, and data storage in microcontroller-based systems.
Please note that these answers are general and may vary depending on the specific implementation and datasheet of the HCF4094M013TR.