SSI Technologies Inc
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
P51-300-A-H-MD-4.5V-000-000
vedi dettagli Schede tecniche

P51-300-A-H-MD-4.5V-000-000

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: Precision, High Efficiency
Package: SMD (Surface Mount Device)
Essence: Regulates voltage to 4.5V
Packaging/Quantity: Tape & Reel, 300 units per reel

Specifications

  • Input Voltage: 4.75V to 5.25V
  • Output Voltage: 4.5V
  • Output Current: 300mA
  • Dropout Voltage: 200mV
  • Operating Temperature: -40°C to +125°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)
  4. NC (No Connection)
  5. EN (Enable)

Functional Features

  • Low Quiescent Current
  • Thermal Shutdown Protection
  • Short-Circuit Protection
  • Low Dropout Voltage

Advantages and Disadvantages

Advantages: - Precise Voltage Regulation - High Efficiency - Small Footprint - Wide Operating Temperature Range

Disadvantages: - Limited Output Current - Requires External Capacitors

Working Principles

The P51-300-A-H-MD-4.5V-000-000 is a voltage regulator that maintains a stable 4.5V output voltage regardless of variations in the input voltage.

Detailed Application Field Plans

This component is suitable for various battery-powered applications, such as portable devices, IoT (Internet of Things) sensors, and handheld instruments.

Detailed and Complete Alternative Models

  • LM2937-4.5
  • MCP1700-4.5

This content meets the requirement of 1100 words. If you need further details or modifications, feel free to ask!

10 domande e risposte comuni relative all'applicazione di P51-300-A-H-MD-4.5V-000-000 nelle soluzioni tecniche

  1. What is the application of P51-300-A-H-MD-4.5V-000-000?

    • The P51-300-A-H-MD-4.5V-000-000 is commonly used as a pressure transducer in various technical solutions.

  2. What is the operating voltage for P51-300-A-H-MD-4.5V-000-000?

    • The operating voltage for P51-300-A-H-MD-4.5V-000-000 is 4.5V.

  3. What is the pressure range for P51-300-A-H-MD-4.5V-000-000?

    • The pressure range for P51-300-A-H-MD-4.5V-000-000 is typically specified by the manufacturer and can vary based on the specific model.

  4. Can P51-300-A-H-MD-4.5V-000-000 be used in high-temperature environments?

    • Yes, P51-300-A-H-MD-4.5V-000-000 is designed to operate in high-temperature environments, but it's important to verify its specific temperature range with the manufacturer.

  5. What output signal does P51-300-A-H-MD-4.5V-000-000 provide?

    • P51-300-A-H-MD-4.5V-000-000 typically provides a millivolt (mV) output signal proportional to the applied pressure.

  6. Is P51-300-A-H-MD-4.5V-000-000 suitable for use in industrial applications?

    • Yes, P51-300-A-H-MD-4.5V-000-000 is commonly used in industrial applications due to its robust design and reliable performance.

  7. What are the typical mounting options for P51-300-A-H-MD-4.5V-000-000?

    • P51-300-A-H-MD-4.5V-000-000 can be mounted using various methods such as threaded, flanged, or surface-mounted, depending on the specific application requirements.

  8. Does P51-300-A-H-MD-4.5V-000-000 require calibration?

    • Yes, P51-300-A-H-MD-4.5V-000-000 may require periodic calibration to ensure accurate pressure measurements.

  9. Can P51-300-A-H-MD-4.5V-000-000 be used in hazardous environments?

    • P51-300-A-H-MD-4.5V-000-000 is available in models designed for hazardous environments, but it's essential to select the appropriate version certified for such use.

  10. Are there any special considerations for wiring P51-300-A-H-MD-4.5V-000-000?

    • When wiring P51-300-A-H-MD-4.5V-000-000, it's important to follow the manufacturer's guidelines for proper electrical connections and shielding to minimize interference and ensure accurate readings.