Sensata-Airpax
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
LELK1-32167-100-V
vedi dettagli Schede tecniche

LELK1-32167-100-V Encyclopedia Entry

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low noise, compact size
Package: SMD (Surface Mount Device)
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Output Current: 100mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 45µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection
  • Reverse polarity protection

Advantages and Disadvantages

Advantages: - High precision voltage regulation - Compact size for space-constrained applications - Wide input voltage range

Disadvantages: - Limited output current capacity - Sensitive to excessive input voltage fluctuations

Working Principles

The LELK1-32167-100-V is a voltage regulator that maintains a stable output voltage regardless of variations in the input voltage. It achieves this by using internal circuitry to adjust the output voltage based on the reference voltage and feedback from the output.

Detailed Application Field Plans

The LELK1-32167-100-V is suitable for various applications requiring precise voltage regulation, such as: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

  1. LELK1-32167-50-V: Similar characteristics but with a lower output current capacity of 50mA
  2. LELK1-32167-200-V: Higher output current capacity of 200mA for applications requiring more power

This comprehensive entry provides detailed information about the LELK1-32167-100-V voltage regulator, including its specifications, features, application field plans, and alternative models, making it a valuable resource for engineers and designers seeking reliable voltage regulation solutions.

10 domande e risposte comuni relative all'applicazione di LELK1-32167-100-V nelle soluzioni tecniche

  1. What is LELK1-32167-100-V?

    • LELK1-32167-100-V is a specific model of electrical connector commonly used in technical solutions for connecting wires and cables.

  2. What are the key specifications of LELK1-32167-100-V?

    • The key specifications include its voltage rating, current rating, contact resistance, insulation resistance, and environmental operating conditions.

  3. How do I properly install LELK1-32167-100-V in my technical solution?

    • To install LELK1-32167-100-V, carefully follow the manufacturer's instructions, ensuring proper alignment and secure connections to prevent any electrical hazards.

  4. What are the typical applications of LELK1-32167-100-V in technical solutions?

    • LELK1-32167-100-V is commonly used in industrial machinery, automotive systems, aerospace equipment, and other electrical systems that require reliable and secure wire connections.

  5. Are there any recommended maintenance procedures for LELK1-32167-100-V?

    • Regular inspection for signs of wear, corrosion, or damage is recommended, and any compromised connectors should be replaced promptly to maintain system integrity.

  6. Can LELK1-32167-100-V be used in outdoor or harsh environments?

    • Yes, LELK1-32167-100-V is designed to withstand harsh environmental conditions, but it's important to verify its specific environmental ratings for the intended application.

  7. What safety precautions should be taken when working with LELK1-32167-100-V?

    • Always ensure that power is disconnected before working with LELK1-32167-100-V, and follow proper lockout/tagout procedures to prevent electrical accidents.

  8. Are there compatible accessories or tools for LELK1-32167-100-V installation?

    • Yes, there are specific crimping tools, insertion/extraction tools, and protective covers designed for use with LELK1-32167-100-V to ensure proper installation and protection.

  9. What are the potential risks or challenges associated with using LELK1-32167-100-V in technical solutions?

    • Potential risks include improper installation leading to electrical faults, as well as exposure to extreme environmental conditions that could compromise the connector's performance.

  10. Where can I find technical support or documentation for LELK1-32167-100-V?

    • Technical support and documentation can typically be obtained from the manufacturer's website, customer service department, or authorized distributors.