L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
BR93G46FVT-3AGE2

BR93G46FVT-3AGE2

Product Overview

Category

BR93G46FVT-3AGE2 belongs to the category of electronic memory devices.

Use

This product is primarily used for data storage and retrieval in various electronic systems.

Characteristics

  • Non-volatile memory: The BR93G46FVT-3AGE2 retains stored data even when power is disconnected.
  • High capacity: This device has a storage capacity of 46 kilobits (Kb).
  • Low power consumption: The BR93G46FVT-3AGE2 operates efficiently with low power requirements.
  • Compact package: It is available in a small form factor, making it suitable for space-constrained applications.
  • Robustness: This memory device is designed to withstand harsh environmental conditions.

Package

The BR93G46FVT-3AGE2 is typically packaged in a surface-mount SOP-8 package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile data storage in electronic systems.

Packaging/Quantity

The BR93G46FVT-3AGE2 is commonly supplied in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Memory Capacity: 46 Kb
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: 10 years (at 55°C)
  • Write/Erase Endurance: 1 million cycles

Detailed Pin Configuration

The BR93G46FVT-3AGE2 features an SOP-8 package with the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Ground (GND)
  7. Power Supply (VCC)
  8. Not Connected (NC)

Functional Features

  • High-speed data transfer: The SPI interface allows for fast and efficient data communication.
  • Write protection: The /WP pin can be used to protect the memory from accidental writes.
  • Sequential read/write operations: The BR93G46FVT-3AGE2 supports sequential read and write operations, enabling efficient data handling.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • Compact package size facilitates integration into space-constrained designs.
  • Low power consumption extends battery life in portable devices.
  • High endurance enables frequent read/write operations without compromising reliability.

Disadvantages

  • Limited storage capacity compared to other memory devices.
  • Relatively higher cost per kilobit compared to larger memory chips.

Working Principles

The BR93G46FVT-3AGE2 utilizes EEPROM (Electrically Erasable Programmable Read-Only Memory) technology. It stores data by trapping electric charges within a floating gate structure. These charges can be manipulated through electrical signals to represent binary data.

Detailed Application Field Plans

The BR93G46FVT-3AGE2 finds applications in various electronic systems, including but not limited to: - Automotive electronics - Industrial control systems - Consumer electronics - Medical devices - Smart meters

Detailed and Complete Alternative Models

  1. BR93G46F-WE2: Similar to BR93G46FVT-3AGE2, but with extended temperature range (-40°C to +105°C).
  2. BR93G46RF-3AGE2: Radio Frequency (RF) enabled variant of BR93G46FVT-3AGE2, allowing wireless data transfer.

These alternative models offer similar functionality with slight variations in specifications to cater to specific application requirements.

Word count: 511 words

10 domande e risposte comuni relative all'applicazione di BR93G46FVT-3AGE2 nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of BR93G46FVT-3AGE2 in technical solutions:

  1. Question: What is the BR93G46FVT-3AGE2?
    Answer: The BR93G46FVT-3AGE2 is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip.

  2. Question: What is the purpose of the BR93G46FVT-3AGE2 in technical solutions?
    Answer: The BR93G46FVT-3AGE2 is commonly used for storing small amounts of non-volatile data, such as configuration settings or calibration data, in various electronic devices.

  3. Question: What is the storage capacity of the BR93G46FVT-3AGE2?
    Answer: The BR93G46FVT-3AGE2 has a storage capacity of 4 kilobits (512 bytes).

  4. Question: How is the BR93G46FVT-3AGE2 connected to a microcontroller or other device?
    Answer: The BR93G46FVT-3AGE2 typically uses a standard serial interface, such as SPI (Serial Peripheral Interface), to communicate with the controlling device.

  5. Question: Can the data stored in the BR93G46FVT-3AGE2 be easily modified?
    Answer: Yes, the data stored in the BR93G46FVT-3AGE2 can be easily modified using appropriate programming techniques.

  6. Question: Is the BR93G46FVT-3AGE2 suitable for high-temperature environments?
    Answer: Yes, the BR93G46FVT-3AGE2 is designed to operate reliably in a wide temperature range, including high-temperature environments.

  7. Question: Can the BR93G46FVT-3AGE2 be used in automotive applications?
    Answer: Yes, the BR93G46FVT-3AGE2 is commonly used in automotive applications due to its robustness and reliability.

  8. Question: Does the BR93G46FVT-3AGE2 require any external components for operation?
    Answer: No, the BR93G46FVT-3AGE2 does not require any external components for basic operation. However, additional components may be needed depending on the specific application requirements.

  9. Question: Is the BR93G46FVT-3AGE2 compatible with different supply voltages?
    Answer: Yes, the BR93G46FVT-3AGE2 supports a wide range of supply voltages, typically from 1.7V to 5.5V.

  10. Question: Can multiple BR93G46FVT-3AGE2 chips be connected together in a system?
    Answer: Yes, multiple BR93G46FVT-3AGE2 chips can be connected together in a system to increase the overall storage capacity if needed.

Please note that these answers are general and may vary depending on the specific implementation and requirements of the technical solution.