Power Integrations
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
TOP257MG
vedi dettagli Schede tecniche

TOP257MG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Standby Power, Wide Input Voltage Range
  • Package: TO-220-7L
  • Essence: Switching Power Supply Controller
  • Packaging/Quantity: Tube/50 pieces

Specifications

  • Input Voltage Range: 85VAC to 265VAC
  • Output Power: Up to 45W
  • Frequency Range: 50kHz to 500kHz
  • Operating Temperature Range: -40°C to +150°C
  • Maximum Duty Cycle: 75%
  • Maximum Output Voltage: 30V
  • Maximum Output Current: 2.5A

Detailed Pin Configuration

  1. Drain
  2. Source
  3. Feedback
  4. Ground
  5. VCC
  6. Sync
  7. Control

Functional Features

  • Primary-Side Regulation (PSR) Control
  • Auto-Restart Protection
  • Over-Temperature Protection
  • Over-Voltage Protection
  • Under-Voltage Lockout (UVLO)
  • Frequency Jittering for EMI Reduction

Advantages and Disadvantages

Advantages

  • High Efficiency
  • Low Standby Power Consumption
  • Compact Size
  • Wide Input Voltage Range
  • Built-in Protections

Disadvantages

  • Limited Maximum Output Power
  • Requires External Components for Complete Power Supply Design

Working Principles

The TOP257MG is a primary-side regulated switcher IC that operates in a flyback topology. It integrates a high-voltage power MOSFET, control circuitry, and protection features into a single package. The device uses primary-side regulation to achieve accurate output voltage control without the need for an optocoupler or secondary-side feedback circuitry.

During operation, the TOP257MG controls the duty cycle of the power MOSFET to regulate the output voltage. It utilizes a proprietary EcoSmart technology that enables high efficiency and low standby power consumption. The device also incorporates various protection mechanisms to ensure safe operation under fault conditions.

Detailed Application Field Plans

The TOP257MG is widely used in various applications, including:

  1. AC-DC Power Supplies
  2. LED Lighting
  3. Home Appliances
  4. Industrial Equipment
  5. Consumer Electronics

Detailed and Complete Alternative Models

  1. TOP258MG: Similar specifications and features, but with higher maximum output power.
  2. TOP256MG: Lower maximum output power, suitable for lower power applications.
  3. TOP255MG: Lower input voltage range, suitable for specific applications.

These alternative models provide flexibility in choosing the appropriate IC based on specific design requirements.

In conclusion, the TOP257MG is a versatile primary-side regulated switcher IC that offers high efficiency, low standby power consumption, and a wide input voltage range. With its compact size and built-in protections, it is suitable for various power management applications. However, designers should consider the limited maximum output power and the need for external components when using this IC.

10 domande e risposte comuni relative all'applicazione di TOP257MG nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of TOP257MG in technical solutions:

  1. Q: What is TOP257MG? A: TOP257MG is a highly integrated offline switcher IC (integrated circuit) designed for low-power applications.

  2. Q: What are the typical applications of TOP257MG? A: TOP257MG is commonly used in power supplies for various electronic devices such as TVs, monitors, set-top boxes, and LED lighting.

  3. Q: What is the input voltage range supported by TOP257MG? A: The input voltage range of TOP257MG is typically between 85V AC and 265V AC.

  4. Q: What is the output power range that TOP257MG can handle? A: TOP257MG can handle output power ranging from a few watts up to around 100 watts, depending on the specific design and thermal considerations.

  5. Q: Does TOP257MG require an external MOSFET? A: No, TOP257MG integrates a high-voltage power MOSFET, eliminating the need for an external MOSFET in most applications.

  6. Q: Can TOP257MG operate in continuous or discontinuous conduction mode? A: TOP257MG can operate in both continuous conduction mode (CCM) and discontinuous conduction mode (DCM), providing flexibility in different load conditions.

  7. Q: What are the key protection features offered by TOP257MG? A: TOP257MG includes various protection features such as overvoltage protection (OVP), overload protection (OLP), and thermal shutdown (TSD) to ensure safe operation.

  8. Q: Is TOP257MG suitable for universal input voltage designs? A: Yes, TOP257MG is designed to support universal input voltage designs, making it suitable for applications worldwide.

  9. Q: Can TOP257MG be used in flyback or buck-boost converter topologies? A: TOP257MG is primarily designed for flyback converter topologies but can also be used in buck-boost configurations with appropriate circuit modifications.

  10. Q: Are there any evaluation boards or reference designs available for TOP257MG? A: Yes, Power Integrations, the manufacturer of TOP257MG, provides evaluation boards and reference designs that can help engineers quickly prototype and implement their power supply solutions.

Please note that the answers provided here are general and may vary depending on specific design requirements and application considerations.