Power Integrations
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
TOP256MG
vedi dettagli Schede tecniche

TOP256MG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Standby Power, Wide Input Voltage Range
  • Package: TO-220-7C
  • Essence: Monolithic Switcher IC
  • Packaging/Quantity: Tube/50 pieces

Specifications

  • Input Voltage Range: 85VAC to 265VAC
  • Output Power: Up to 45W
  • Switching Frequency: 132 kHz
  • Operating Temperature Range: -40°C to +150°C
  • Protection Features: Overload Protection, Overvoltage Protection, Thermal Shutdown

Detailed Pin Configuration

  1. VCC: Supply Voltage Input
  2. GND: Ground
  3. FB: Feedback Input
  4. DRAIN: High-Voltage Power MOSFET Drain Connection
  5. SOURCE: High-Voltage Power MOSFET Source Connection
  6. COMP: Compensation and Error Amplifier Input
  7. CS: Current Sense Input

Functional Features

  • Integrated 700V MOSFET
  • Built-in Soft-Start for Controlled Startup
  • Auto-Restart Protection for Fault Conditions
  • Frequency Modulation for EMI Reduction
  • Cycle-by-Cycle Current Limiting
  • Accurate Overload Protection
  • Adjustable Output Voltage

Advantages

  • High Efficiency Conversion
  • Low Standby Power Consumption
  • Wide Input Voltage Range
  • Compact TO-220-7C Package
  • Comprehensive Protection Features

Disadvantages

  • Relatively High Cost
  • Requires External Components for Operation
  • Limited Output Power Capability

Working Principles

The TOP256MG is a monolithic switcher IC that utilizes a flyback topology for power conversion. It operates by switching the high-voltage MOSFET on and off at a high frequency to transfer energy from the input to the output. The integrated control circuitry ensures efficient power conversion while providing various protection features.

Detailed Application Field Plans

The TOP256MG is commonly used in various power management applications, including:

  1. AC-DC Power Supplies
  2. LED Lighting Systems
  3. Industrial Controls
  4. Home Appliances
  5. Consumer Electronics

Detailed and Complete Alternative Models

  1. TOP257MG: Similar specifications and features, but with higher output power capability.
  2. TOP258MG: Similar specifications and features, but with additional built-in protection features.
  3. TOP255MG: Similar specifications and features, but with lower input voltage range.

These alternative models provide flexibility for different application requirements while maintaining similar functionality to the TOP256MG.

In conclusion, the TOP256MG is a highly efficient monolithic switcher IC designed for power management applications. It offers a wide input voltage range, comprehensive protection features, and compact packaging. While it has some limitations in terms of cost and output power capability, it provides reliable and efficient power conversion for various electronic devices.

10 domande e risposte comuni relative all'applicazione di TOP256MG nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of TOP256MG in technical solutions:

  1. Q: What is TOP256MG? A: TOP256MG is a high-performance integrated switcher used for offline power conversion applications.

  2. Q: What are the typical applications of TOP256MG? A: TOP256MG is commonly used in applications such as LED lighting, industrial power supplies, consumer electronics, and telecommunication equipment.

  3. Q: What is the input voltage range supported by TOP256MG? A: The input voltage range of TOP256MG is typically between 85VAC and 265VAC.

  4. Q: What is the output power range that TOP256MG can handle? A: TOP256MG can handle output power ranging from a few watts up to around 100 watts, depending on the specific application and design.

  5. Q: Does TOP256MG support power factor correction (PFC)? A: Yes, TOP256MG supports active power factor correction (PFC) which helps improve the overall power quality and efficiency of the system.

  6. Q: Can TOP256MG operate in continuous or discontinuous conduction mode? A: TOP256MG can operate in both continuous conduction mode (CCM) and discontinuous conduction mode (DCM), providing flexibility in different load conditions.

  7. Q: What are the key protection features offered by TOP256MG? A: TOP256MG includes various protection features such as overvoltage protection (OVP), overcurrent protection (OCP), thermal shutdown, and undervoltage lockout (UVLO).

  8. Q: Is TOP256MG compatible with dimming functionality for LED lighting applications? A: Yes, TOP256MG can be easily integrated with external dimming circuits to support dimming functionality in LED lighting applications.

  9. Q: What is the efficiency range of TOP256MG? A: The efficiency of TOP256MG typically ranges from 85% to 95%, depending on the specific operating conditions and load requirements.

  10. Q: Are there any reference designs or application notes available for TOP256MG? A: Yes, the manufacturer provides reference designs and application notes that can help engineers in implementing TOP256MG in their technical solutions efficiently.

Please note that these answers are general and may vary based on specific design considerations and application requirements.