Power Integrations
L'immagine può essere rappresentativa.
Vedi le specifiche per i dettagli del prodotto.
LNK6778K
vedi dettagli Schede tecniche

LNK6778K

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High efficiency - Low standby power consumption - Wide input voltage range - Over-temperature protection - Over-voltage protection - Over-current protection

Package: TO-220

Essence: The LNK6778K is a power management IC designed for efficient energy conversion and control in various applications.

Packaging/Quantity: The LNK6778K is available in a TO-220 package and is typically sold in reels of 1000 units.

Specifications

The LNK6778K has the following specifications:

  • Input Voltage Range: 85VAC to 265VAC
  • Output Voltage: 5V
  • Output Current: 1A
  • Switching Frequency: 132 kHz
  • Efficiency: Up to 88%
  • Standby Power Consumption: Less than 50mW
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LNK6778K has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. EN/UVLO: Enable/Undervoltage Lockout pin
  5. BP/MODE: Burst Mode® operation / Frequency Foldback pin
  6. DRAIN: High-voltage power MOSFET drain connection
  7. SOURCE: High-voltage power MOSFET source connection

Functional Features

The LNK6778K offers the following functional features:

  1. Primary-Side Control: Eliminates the need for an optocoupler and secondary-side feedback components, reducing cost and complexity.
  2. Advanced Protection Features: Over-temperature, over-voltage, and over-current protection ensure safe operation and system reliability.
  3. Efficiency Optimization: High efficiency and low standby power consumption contribute to energy savings and reduced environmental impact.
  4. Wide Input Voltage Range: Allows operation in a wide range of input voltages, making it suitable for various applications.

Advantages and Disadvantages

Advantages: - Primary-side control simplifies design and reduces component count - Advanced protection features enhance system reliability - High efficiency contributes to energy savings - Wide input voltage range allows for versatile application

Disadvantages: - Limited output current capability (up to 1A) - Requires careful consideration of thermal management due to high operating temperature range

Working Principles

The LNK6778K utilizes primary-side control to regulate the output voltage. It operates by adjusting the duty cycle of the internal power MOSFET based on the feedback signal from the FB pin. This eliminates the need for an optocoupler and secondary-side feedback components, reducing cost and complexity. The IC also incorporates advanced protection features such as over-temperature, over-voltage, and over-current protection to ensure safe operation and protect the system.

Detailed Application Field Plans

The LNK6778K is widely used in various applications, including but not limited to:

  1. Power supplies for consumer electronics
  2. LED lighting systems
  3. Industrial automation equipment
  4. Home appliances
  5. Battery chargers

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the LNK6778K include:

  1. LNK6778J
  2. LNK6778L
  3. LNK6778M
  4. LNK6778N

These alternative models are part of the same product family and provide comparable performance and features.

In conclusion, the LNK6778K is a power management IC designed for efficient energy conversion and control. Its primary-side control, advanced protection features, and wide input voltage range make it suitable for various applications. While it has limitations in terms of output current capability, its advantages outweigh the disadvantages, making it a reliable choice for power management needs.

10 domande e risposte comuni relative all'applicazione di LNK6778K nelle soluzioni tecniche

Sure! Here are 10 common questions and answers related to the application of LNK6778K in technical solutions:

  1. Q: What is LNK6778K? A: LNK6778K is a highly integrated, offline switcher IC designed for low-power applications.

  2. Q: What are the key features of LNK6778K? A: LNK6778K features include primary-side regulation, high efficiency, accurate constant voltage (CV) and constant current (CC) control, and comprehensive protection features.

  3. Q: What are the typical applications of LNK6778K? A: LNK6778K is commonly used in LED lighting, smart home devices, industrial controls, and other low-power applications.

  4. Q: How does LNK6778K achieve primary-side regulation? A: LNK6778K uses primary-side sensing and regulation techniques, eliminating the need for an optocoupler or secondary-side feedback circuitry.

  5. Q: Can LNK6778K operate in a wide input voltage range? A: Yes, LNK6778K can operate in a wide input voltage range, typically from 85VAC to 265VAC.

  6. Q: Does LNK6778K support dimming functionality? A: Yes, LNK6778K supports both analog and PWM dimming methods, allowing for flexible brightness control in lighting applications.

  7. Q: What are the advantages of using LNK6778K in LED lighting applications? A: LNK6778K offers high efficiency, accurate current control, excellent line and load regulation, and built-in protection features, making it ideal for LED lighting designs.

  8. Q: Is LNK6778K suitable for battery-powered applications? A: No, LNK6778K is primarily designed for offline applications and requires an AC input.

  9. Q: What are the key protection features of LNK6778K? A: LNK6778K includes features such as over-temperature protection (OTP), output short-circuit protection (SCP), and open-loop protection (OLP) to ensure safe operation.

  10. Q: Are there any reference designs available for LNK6778K? A: Yes, Power Integrations provides reference designs and application notes that can help engineers implement LNK6778K in their technical solutions.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios.